BERTRAND Joël a écrit :> Hello,> > I'm trying to configure an AverTV Hybrid Express card. I've probably> done a mistake...> > Distribution : Linux Debian lenny (kernel 2.6.26 from kernel.org).> > cauchy:[/etc/modprobe.d] > lspci> ...> 02:00.0 Multimedia video controller: Conexant Device 8852 (rev 02)> ...> cauchy:[/etc/modprobe.d] > lspci -nv> ...> 02:00.0 0400: 14f1:8852 (rev 02)> Subsystem: 1461:c039> Flags: bus master, fast devsel, latency 0, IRQ 16> Memory at f0000000 (64-bit, non-prefetchable) [size=2M]> Capabilities: [40] Express Endpoint, MSI 00> Capabilities: [80] Power Management version 2> Capabilities: [90] Vital Product Data <?>> Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+> Queue=0/0 Enable-> Capabilities: [100] Advanced Error Reporting <?>> Capabilities: [200] Virtual Channel <?>> Kernel driver in use: cx23885> Kernel modules: cx23885> ...> > I have seen that this card should work with cx23885.> From dmesg :> > CORE cx23885[0]: subsystem: 1461:c039, board: DViCO FusionHDTV5 Express> [card=4,insmod option]> cx23885[0]: i2c bus 0 registered> cx23885[0]: i2c bus 1 registered> cx25840' 3-0044: cx25 0-21 found @ 0x88 (cx23885[0])> cx23885[0]: i2c bus 2 registered> cx23885[0]: cx23885 based dvb card> tuner-simple 1-0061: creating new instance> tuner-simple 1-0061: type set to 64 (LG TDVS-H06xF)> DVB: registering new adapter (cx23885[0])> DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...> cx23885_dev_checkrevision() Hardware revision = 0xb0> cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio:> 0xf0000000> > I have to add card=4 option. With all others card, dvb devices are not> created. Card seems to be usable :> Root cauchy:[/sys/class/dvb] > ls -al> total 0> drwxr-xr-x 6 root root 0 jui 21 19:24 .> drwxr-xr-x 35 root root 0 jui 21 19:21 ..> drwxr-xr-x 3 root root 0 jui 21 19:24 dvb0.demux0> drwxr-xr-x 3 root root 0 jui 21 19:24 dvb0.dvr0> drwxr-xr-x 3 root root 0 jui 21 19:24 dvb0.frontend0> drwxr-xr-x 3 root root 0 jui 21 19:24 dvb0.net0> Root cauchy:[/sys/class/dvb] > ls /dev/dvb/> adapter0> Root cauchy:[/sys/class/dvb] > ls /dev/dvb/adapter0/*> /dev/dvb/adapter0/demux0 /dev/dvb/adapter0/frontend0> /dev/dvb/adapter0/dvr0 /dev/dvb/adapter0/net0> Root cauchy:[/sys/class/dvb] >> > But I'm not able to continue...> > Root cauchy:[~] > dvbscan -out raw test /usr/share/dvb/dvb-t/fr-Paris> > This last command does not crash, but does nothing...> > 1599 root 20 0 14092 492 368 R 100 0.0 28:16.61 dvbscan Does someone use this adapter ? I have investigated and build the lastv4l-dvb tree (against 2.6.26 linux kernel) without any success. Kernelloads modules (cx23885, tveeprom, videobuf_dvb, videobuf_dma_sg,videobuf_core and lgdt330x) without error. Regards, JKB _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
