Did makemake installmake rmmodreplug strick -> lsmod | grep usbdvb_usb_af9015 23820 1 dvb_usb 22924 1 dvb_usb_af9015dvb_core 80636 1 dvb_usbi2c_core 24832 4 mxl5005s,af9013,dvb_usb_af9015,dvb_usbusbhid 31872 0 hid 38784 1 usbhidusbcore 146028 6dvb_usb_af9015,dvb_usb,usbhid,ehci_hcd,ohci_hcd -> channel scan Using DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 402000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4.FE_READ_STATUS: Remote I/O error Transponders: 1/63 Invalid section length or timeout: pid=17 Frontend closedopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 490000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4.FE_READ_STATUS: Remote I/O error Transponders: 12/63 Invalid section length or timeout: pid=17 Frontend closedopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 578000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4.FE_READ_STATUS: Remote I/O error Transponders: 23/63 Invalid section length or timeout: pid=17 Frontend closedopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 602000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4.FE_READ_STATUS: Remote I/O error Transponders: 26/63 Invalid section length or timeout: pid=17 Frontend closedopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 626000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4.FE_READ_STATUS: Remote I/O error Transponders: 29/63 Invalid section length or timeout: pid=17 Frontend closedopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 650000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4.FE_READ_STATUS: Remote I/O error Transponders: 32/63 Invalid section length or timeout: pid=17 Frontend closedopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 674000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4.FE_READ_STATUS: Remote I/O error Transponders: 35/63 Invalid section length or timeout: pid=17 Frontend closedopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 698000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4.FE_READ_STATUS: Remote I/O error Transponders: 38/63 Invalid section length or timeout: pid=17 Frontend closedopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 722000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4.FE_READ_STATUS: Remote I/O error Transponders: 41/63 Invalid section length or timeout: pid=17 Frontend closedopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 746000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4.FE_READ_STATUS: Remote I/O error Transponders: 44/63 Invalid section length or timeout: pid=17 Frontend closedopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 770000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4.FE_READ_STATUS: Remote I/O error Transponders: 47/63 Invalid section length or timeout: pid=17 Frontend closedopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 794000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4.FE_READ_STATUS: Remote I/O error Transponders: 50/63 Invalid section length or timeout: pid=17 Frontend closedopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 818000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4.FE_READ_STATUS: Remote I/O error Transponders: 53/63 Invalid section length or timeout: pid=17 Frontend closedopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 842000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4.FE_READ_STATUS: Remote I/O error Transponders: 56/63 Invalid section length or timeout: pid=17 Frontend closedopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 866000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4ERROR tuning : Invalid argumentFrontend closeddvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBopenFe:: Device or resource busydvbsi: Cant tune DVBUsing DVB device 0:0 "Afatech AF9013 DVB-T"tuning DVB-T to 898000000 Hzinv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4ERROR tuning : Invalid argumentFrontend closeddvbsi: Cant tune DVBTransponders: 63dvbsi: The end :)Channels found: 0 Any further ideas or informations which I can provide? ThanksThomas Am Dienstag, den 22.07.2008, 21:21 +0300 schrieb Antti Palosaari:> tom wrote:> > thanks for the quick reply and providing the test!!> > > > Should I use 'make rminstall' before I instal the test?> > And for installing the test, should I use the 'make all'?> > make> make install> make rmmod> replug stick> > > > > Thomas> > > > Am Dienstag, den 22.07.2008, 19:52 +0200 schrieb Thomas Ickes:> >> -----Ursprüngliche Nachricht-----> >> Von: Antti Palosaari [mailto:crope@xxxxxx] > >> Gesendet: Dienstag, 22. Juli 2008 19:21> >> An: Thomas Ickes> >> Cc: linux-dvb@xxxxxxxxxxx> >> Betreff: Re: Problems with MSI Digivox Duo DVB-T USB, Ubuntu 8.04> >>> >> Thomas Ickes wrote:> >>> Hello,> >>>> >>> isn't there anyone who has some hints for me regarding the PID Filter Problems?> >> For me it looked like af9015_pid_filter_ctrl() was failing and thats why > >> errors. I don't have idea why it is failing. But I did special build for > >> you to test again. Now whole PID-filter is disabled.> >> http://linuxtv.org/hg/~anttip/af9015_disable_pid_filter/> >>> >> PID-filtering is needed if we have only USB1.1 ports. PID-filter removes > >> unnecessary channels from transport stream that it can fit to USB1.1 > >> speed. USB2.0 does not need PID-filtering because it is capable of > >> transfer whole stream (MUX).> >>> >> Antti> >>> Thanks> >>> Thomas> >>>> >>> -----Ursprüngliche Nachricht-----> >>> Von: linux-dvb-bounces@xxxxxxxxxxx [mailto:linux-dvb-bounces@xxxxxxxxxxx] Im Auftrag von tom> >>> Gesendet: Sonntag, 20. Juli 2008 15:19> >>> An: Antti Palosaari> >>> Cc: linux-dvb@xxxxxxxxxxx> >>> Betreff: Re: [linux-dvb] Problems with MSI Digivox Duo DVB-T USB, Ubuntu 8.04> >>>> >>> Hello Antti,> >>>> >>> based on the techn. spec of my notebook (compaq evo n800w) there are usb> >>> 2.0 ports...> >>> I'm lost in space regarding the pid filters, I even don't know what the> >>> pid filter is :-). Sorry, but I'm not using linux for so long...> >>>> >>> Maybe someone else have an idea why this is not working.> >>>> >>> Thomas > >>>> >>> Am Sonntag, den 20.07.2008, 15:56 +0300 schrieb Antti Palosaari:> >>>> hello tom> >>>>> >>>> tom wrote:> >>>>> results of lsmod | grep dvb:> >>>>>> >>>>> dvb_usb_af9015 24332 0 > >>>>> dvb_usb 22924 1 dvb_usb_af9015> >>>>> dvb_core 80636 1 dvb_usb> >>>>> i2c_core 24832 4 mxl5005s,af9013,dvb_usb_af9015,dvb_usb> >>>>> usbcore 146028> >>>>> 6 dvb_usb_af9015,dvb_usb,usbhid,ehci_hcd,ohci_hcd> >>>>>> >>>>> Thomas> >>>>>> >>>>>> >>>>> Am Samstag, den 19.07.2008, 10:58 +0200 schrieb tom:> >>>>>> Hi Antti,> >>>>>> I have installed the driver. After reboot dmesg gives the following.> >>>>>> [ 1532.502328] dvb-usb: could not handle pid_parser> >>>> I don't know whats wrong but it looks like coming from PID-filter. You > >>>> have only USB1.1 ports?> >>>>> >>>> Driver will disable 2nd tuner / frontend if there is only USB1.1 because > >>>> I don't know if there is any way to use PID-filters for 2nd frontend. > >>>> Also FE#1 performance is bad in dual tuner device for unknown reason. > >>>> But I still don't see reason why your device is not working.> >>>>> >>>> Thats weird situation:> >>>> dual mode (2 receivers):> >>>> FE#1 bad> >>>> FE#2 good> >>>> single mode (1 receiver):> >>>> FE#1 good> >>>>> >>>> >>> _______________________________________________> >>> linux-dvb mailing list> >>> linux-dvb@xxxxxxxxxxx> >>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb> >>>> >>>> >>> _______________________________________________> >>> linux-dvb mailing list> >>> linux-dvb@xxxxxxxxxxx> >>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb> >>> > > > _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
