thanks for the quick reply and providing the test!! Should I use 'make rminstall' before I instal the test?And for installing the test, should I use the 'make all'? Thomas Am Dienstag, den 22.07.2008, 19:52 +0200 schrieb Thomas Ickes:> > -----Ursprüngliche Nachricht-----> Von: Antti Palosaari [mailto:crope@xxxxxx] > Gesendet: Dienstag, 22. Juli 2008 19:21> An: Thomas Ickes> Cc: linux-dvb@xxxxxxxxxxx> Betreff: Re: Problems with MSI Digivox Duo DVB-T USB, Ubuntu 8.04> > Thomas Ickes wrote:> > Hello,> > > > isn't there anyone who has some hints for me regarding the PID Filter Problems?> > For me it looked like af9015_pid_filter_ctrl() was failing and thats why > errors. I don't have idea why it is failing. But I did special build for > you to test again. Now whole PID-filter is disabled.> http://linuxtv.org/hg/~anttip/af9015_disable_pid_filter/> > PID-filtering is needed if we have only USB1.1 ports. PID-filter removes > unnecessary channels from transport stream that it can fit to USB1.1 > speed. USB2.0 does not need PID-filtering because it is capable of > transfer whole stream (MUX).> > Antti> > > > Thanks> > Thomas> > > > -----Ursprüngliche Nachricht-----> > Von: linux-dvb-bounces@xxxxxxxxxxx [mailto:linux-dvb-bounces@xxxxxxxxxxx] Im Auftrag von tom> > Gesendet: Sonntag, 20. Juli 2008 15:19> > An: Antti Palosaari> > Cc: linux-dvb@xxxxxxxxxxx> > Betreff: Re: [linux-dvb] Problems with MSI Digivox Duo DVB-T USB, Ubuntu 8.04> > > > Hello Antti,> > > > based on the techn. spec of my notebook (compaq evo n800w) there are usb> > 2.0 ports...> > I'm lost in space regarding the pid filters, I even don't know what the> > pid filter is :-). Sorry, but I'm not using linux for so long...> > > > Maybe someone else have an idea why this is not working.> > > > Thomas > > > > Am Sonntag, den 20.07.2008, 15:56 +0300 schrieb Antti Palosaari:> >> hello tom> >>> >> tom wrote:> >>> results of lsmod | grep dvb:> >>>> >>> dvb_usb_af9015 24332 0 > >>> dvb_usb 22924 1 dvb_usb_af9015> >>> dvb_core 80636 1 dvb_usb> >>> i2c_core 24832 4 mxl5005s,af9013,dvb_usb_af9015,dvb_usb> >>> usbcore 146028> >>> 6 dvb_usb_af9015,dvb_usb,usbhid,ehci_hcd,ohci_hcd> >>>> >>> Thomas> >>>> >>>> >>> Am Samstag, den 19.07.2008, 10:58 +0200 schrieb tom:> >>>> Hi Antti,> >>>> I have installed the driver. After reboot dmesg gives the following.> >>>> [ 1532.502328] dvb-usb: could not handle pid_parser> >> I don't know whats wrong but it looks like coming from PID-filter. You > >> have only USB1.1 ports?> >>> >> Driver will disable 2nd tuner / frontend if there is only USB1.1 because > >> I don't know if there is any way to use PID-filters for 2nd frontend. > >> Also FE#1 performance is bad in dual tuner device for unknown reason. > >> But I still don't see reason why your device is not working.> >>> >> Thats weird situation:> >> dual mode (2 receivers):> >> FE#1 bad> >> FE#2 good> >> single mode (1 receiver):> >> FE#1 good> >>> > > > > > _______________________________________________> > linux-dvb mailing list> > linux-dvb@xxxxxxxxxxx> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb> > > > > > _______________________________________________> > linux-dvb mailing list> > linux-dvb@xxxxxxxxxxx> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb> > _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
