On Mon, 14 Jul 2008 10:19:00 +0200 (CEST) Tomas Blaha <tomasb@xxxxxxxx> wrote: > Hello, > > I would like working remote too, but what I see from source code the > remote is not supported. There is > > struct dvb_usb_device_properties dib0700_devices[] > > in dib0700_devices.c which lists abilities of devices and for this adapter > and "DiBcom STK7070PD reference design" there is no RC support. I even try > to enable the support as it is enabled on other devices from the same , > family, but without luck. Drivers queryed the adapter for a RC keypress > afaik correctly, but only zeros were returned from the device. Same here... any hints where to look at ( functions, files) for getting the ir receiver/remote control to work ? As noted above by Tomas Blaha, I have enabled the support as on other devices from the same family: " .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dib0700_rc_keys, .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), .rc_query = dib0700_rc_query " and on dvb-t stick init dmesg tells now: "input: IR-receiver inside an USB DVB receiver as /class/input/input21" But I don't even know if this is a step forward or doesn't mean anything at all as the receiver may still be uninitialized ? It is getting queryed but the function dib0700_rc_query seems to return on: /* losing half of KEY_0 events from Philipps rc5 remotes.. */ if (key[0]==0 && key[1]==0 && key[2]==0 && key[3]==0) return 0; The remote seems to be the "tiny Pinnacle remote" in the code, it has all its keys and is tiny. Heres some more dmesg output: dvb-usb: found a 'Pinnacle PCTV Dual DVB-T Diversity Stick' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' dib0700: firmware started successfully. dvb-usb: found a 'Pinnacle PCTV Dual DVB-T Diversity Stick' in warm state. power control: 1 dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Pinnacle PCTV Dual DVB-T Diversity Stick) DiB7000P: checking demod on I2C address: 130 (82) ep 0 read error (status = -32) I2C read failed on address 41 DiB7000P: i2c read error on 768 DiB7000P: wrong Vendor ID (read=0x0) DiB7000P: checking demod on I2C address: 18 (12) DiB7000P: setting output mode for demod ffff8100dfb714c8 to 4 DiB7000P: IC 1 initialized (to i2c_address 0x82) DiB7000P: checking demod on I2C address: 128 (80) ep 0 read error (status = -32) I2C read failed on address 40 DiB7000P: i2c read error on 768 DiB7000P: wrong Vendor ID (read=0x100) DiB7000P: checking demod on I2C address: 18 (12) DiB7000P: setting output mode for demod ffff8100dfb714c8 to 4 DiB7000P: IC 0 initialized (to i2c_address 0x80) DiB7000P: setting output mode for demod ffff8100dfb714c8 to 0 DiB7000P: setting output mode for demod ffff8100dfb714c8 to 0 DiB7000P: checking demod on I2C address: 128 (80) DiB7000P: gpio dir: ffff: val: 0, pwm_pos: ffff DiB7000P: setting output mode for demod ffff810112326800 to 0 DiB7000P: using default timf DVB: registering frontend 0 (DiBcom 7000PC)... DiB0070: Revision: 3 DiB0070: CTRL_LO5: 0x16a4 DiB0070: WBDStart = 314 (Vargen) - FF = 391 DiB0070: successfully identified dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Pinnacle PCTV Dual DVB-T Diversity Stick) DiB7000P: checking demod on I2C address: 130 (82) DiB7000P: gpio dir: ffff: val: 0, pwm_pos: ffff DiB7000P: setting output mode for demod ffff81011907d000 to 0 DiB7000P: using default timf DVB: registering frontend 1 (DiBcom 7000PC)... DiB0070: Revision: 3 DiB0070: CTRL_LO5: 0x16a4 DiB0070: WBDStart = 425 (Vargen) - FF = 528 DiB0070: successfully identified input: IR-receiver inside an USB DVB receiver as /class/input/input21 dvb-usb: schedule remote query interval to 150 msecs. power control: 0 dvb-usb: Pinnacle PCTV Dual DVB-T Diversity Stick successfully initialized and connected. usbcore: registered new interface driver dvb_usb_dib0700 -- Best regards, Ingo Arndt _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
