hi,
I am working on DVB-T for the first time. I am using a Pinnacle PCTV 2001e USB DVB-T dongle.In that the device dri vers are getting registered and the device is getting detected.I am using a 2.6.23.15 kernel.
The dmesg is as follows:
dvb-usb: Pinnacle PCTV Dual DVB-T Diversity Stick successfully deinitialized and disconnected.
usb 1-1.4: new high speed USB device using musb_hdrc and address 4
usb 1-1.4: Product: PCTV 2001e
usb 1-1.4: Manufacturer: PINNACLE
usb 1-1.4: SerialNumber: 12020607
usb 1-1.4: configuration #1 chosen from 1 choice
dvb-usb: found a 'Pinnacle PCTV Dual DVB-T Diversity Stick' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Pinnacle PCTV Dual DVB-T Diversity Stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Pinnacle PCTV Dual DVB-T Diversity Stick)
DVB: registering frontend 0 (DiBcom 7000PC)...
DiB0070: successfully identified
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Pinnacle PCTV Dual DVB-T Diversity Stick)
DVB: registering frontend 1 (DiBcom 7000PC)...
DiB0070: successfully identified
dvb-usb: Pinnacle PCTV Dual DVB-T Diversity Stick successfully initialized and connected.
But, after that when i am trying to run any scan application , it is showing "scan failed".
the dmesg after running scan application is,
APPLN INFO >> Inside scan_network
APPLN INFO >> Inside tune_initial
Inside alloc_transponder
initial transponder 474166000 0 2 9 3 1 0 0
Inside alloc_transponder
initial transponder 498166000 0 2 9 3 1 0 0
Inside alloc_transponder
initial transponder 522166000 0 2 9 3 1 0 0
Inside alloc_transponder
initial transponder 538166000 0 2 9 3 1 0 0
Inside alloc_transponder
initial transponder 562166000 0 2 9 3 1 0 0
Inside alloc_transponder
initial transponder 586166000 0 3 9 3 1 2 0
Inside alloc_transponder
initial transponder 714166000 0 2 9 3 1 0 0
Inside alloc_transponder
initial transponder 738166000 0 2 9 3 1 0 0
Inside alloc_transponder
initial transponder 754166000 0 2 9 3 1 0 0
Inside alloc_transponder
initial transponder 762166000 0 2 9 3 1 0 0
Inside alloc_transponder
initial transponder 786166000 0 2 9 3 1 0 0
Inside alloc_transponder
initial transponder 810166000 0 2 9 3 1 0 0
Inside tune_to_next_transponder()
Inside tune_to_transponder()
APPLN INFO >> Entered __tune_to_transponder()
>>> tune to: 474166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
APPLN INFO >> Entered __tune_to_transponder()
>>> tune to: 474166000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
Inside tune_to_transponder()
etc, etc.
Can Anyone Please tell me if you have faced a similar problem or what is happening ?
Do i have to add something to the kernel?
Best regards,
subhro
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
