I have a problem with wintv 1110 & linux 2.6.24.5 .
The dvb card doesn't works. When I run the scan command
it doesn't found some channel available.
command : scan -a 0 file_frq
output :>>>
tune to: 474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
.....
The configuration seem to be good, all essential modules are loaded in the kernel.
command: lsmod | grep saa
saa7146_vv 48768 2 budget_av,dvb_ttpci
saa7146 19080 6 budget,budget_av,budget_ci,budget_core,dvb_ttpci,saa7146_vv
saa7134_dvb 18316 0
videobuf_dvb 8580 1 saa7134_dvb
tda1004x 19076 2 saa7134_dvb
saa7134_alsa 15040 0
saa7134 124240 2 saa7134_dvb,saa7134_alsa
compat_ioctl32 5120 1 saa7134
videobuf_dma_sg 14852 5 saa7146_vv,saa7134_dvb,videobuf_dvb,saa7134_alsa,saa7134
videobuf_core 18436 4 saa7146_vv,videobuf_dvb,saa7134,videobuf_dma_sg
ir_kbd_i2c 11408 1 saa7134
snd_pcm 72068 4 snd_pcm_oss,saa7134_alsa,snd_ens1371,snd_ac97_codec
ir_common 34308 3 budget_ci,saa7134,ir_kbd_i2c
videodev 29824 2 saa7146_vv,saa7134
v4l2_common 19200 4 saa7146_vv,tuner,saa7134,videodev
snd 47716 11 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,saa7134_alsa,snd_ens1371,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer
v4l1_compat 17668 3 saa7146_vv,saa7134,videodev
i2c_core 22528 19 budget,budget_av,budget_ci,budget_core,dvb_ttpci,ttpci_eeprom,ves1820,tda827x,saa7134_dvb,tda1004x,tuner,tea5767,tda8290,tuner_simple,mt20xx,tea5761,saa7134,ir_kbd_i2c,i2c_piix4
In the directory /dev there are the devices video and dvb..
command : ls /dev/dvb/adapter0/
demux0 dvr0 frontend0 net0
command ls /dev/video*
/dev/video@ /dev/video0@
I have installed the v4l-dvb and dvb-apps from mercurial avaible at this address
http://www.linuxtv.org/repo/. and in the /lib/firmware I copied the file dvb-fe-tda10046.fw.
Now I don't know I fix this problem.
I attach the output of dmesg below
command: dmesg | grep DVB
saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,insmod option]
DVB: registering new adapter (saa7133[0])
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
command: dmesg | grep saa
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:06:0e.0, rev: 209, irq: 19, latency: 64, mmio: 0xfebff800
saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,insmod option]
saa7133[0]: board init: gpio is 6400000
ir-kbd-i2c: HVR 1110 detected at i2c-0/0-0071/ir0 [saa7133[0]]
saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c scan: found device @ 0x10 [???]
saa7133[0]: i2c scan: found device @ 0x96 [???]
saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
saa7133[0]: i2c scan: found device @ 0xe0 [???]
saa7133[0]: i2c scan: found device @ 0xe2 [???]
saa7133[0]: i2c scan: found device @ 0xe4 [???]
saa7133[0]: i2c scan: found device @ 0xe6 [???]
tuner 0-004b: chip found @ 0x96 (saa7133[0])
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 19 registered as card -1
DVB: registering new adapter (saa7133[0])
saa7146: register extension 'dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
saa7146: register extension 'budget dvb'.
command : dmesg | grep tda
tda8290 0-004b: setting tuner address to 61
tuner 0-004b: type set to tda8290+75a
tda8290 0-004b: setting tuner address to 61
tuner 0-004b: type set to tda8290+75a
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 29 -- ok
Somebody can you help me?
thanks
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
