|
Hi Antii, Thanks for that, it worked. When I press the numbers (0-9), it will repeat on the screen (with the key code appearing in the messages file). Is that expected? Here are the codes: number 0 = af9015_rc_query: 00 00 27 00 00 00 00 00 number 1 = af9015_rc_query: 00 00 1e 00 00 00 00 00 number 2 = af9015_rc_query: 00 00 1f 00 00 00 00 00 number 3 = af9015_rc_query: 00 00 20 00 00 00 00 00 number 4 = af9015_rc_query: 00 00 21 00 00 00 00 00 number 5 = af9015_rc_query: 00 00 22 00 00 00 00 00 number 6 = af9015_rc_query: 00 00 23 00 00 00 00 00 number 7 = af9015_rc_query: 00 00 24 00 00 00 00 00 number 8 = af9015_rc_query: 00 00 25 00 00 00 00 00 number 9 = af9015_rc_query: 00 00 26 00 00 00 00 00 channel up = af9015_rc_query: 00 00 52 00 00 00 00 00 channel down = af9015_rc_query: 00 00 51 00 00 00 00 00 volume up = af9015_rc_query: 00 00 4f 00 00 00 00 00 volume down = af9015_rc_query: 00 00 50 00 00 00 00 00 Enter key = af9015_rc_query: 00 00 28 00 00 00 00 00 For some reason the last key i press on the remote will repeat on screen after i have pressed it. For example, i just hit the enter key on the remote, now in this email if i hit enter it repeats on screen. Strange... OK hope this helps. Thanks Antii. Alistair > Date: Thu, 3 Jul 2008 14:11:14 +0300 > From: crope@xxxxxx > To: tlli@xxxxxxxxxxx > CC: linux-dvb@xxxxxxxxxxx > Subject: Re: Leadtek WinFast DTV Dongle Gold Remote issues > > Alistair M wrote: > > Hello Antii, > > > > I've attached the usb snoop. I hope I did it correctly. > > It was correct :) > > I added IR-code table to the driver. Now we should find correct keys for > those codes. > 1) install driver from http://linuxtv.org/hg/~anttip/af9015-new/ (make & > make install; make rmmod; tail -100f /var/log/messages) > 2) it should print remote codes to the message log when you press remote > keys. Write down which key gives which code. > > Here is example what it should output to the message-log when key is > pressed; > af9015_rc_query: 00 00 1e 00 00 00 00 00 > af9015_rc_query: 00 00 1f 00 00 00 00 00 > af9015_rc_query: 00 00 20 00 00 00 00 00 > af9015_rc_query: 00 00 21 00 00 00 00 00 > > report like: > number 1 = af9015_rc_query: 00 00 1f 00 00 00 00 00 > channel up = af9015_rc_query: 00 00 1f 00 00 00 00 00 > volume down = af9015_rc_query: 00 00 20 00 00 00 00 00 > > > Thank you so much for this. > > > > Regards, > > Alistair. > > regards > Antti > > -- > http://palosaari.fi/ Check our comprehensive Salary Centre Overpaid or Underpaid? |
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
