Alistair M wrote: > Hello Antii, > > I've attached the usb snoop. I hope I did it correctly. It was correct :) I added IR-code table to the driver. Now we should find correct keys for those codes. 1) install driver from http://linuxtv.org/hg/~anttip/af9015-new/ (make & make install; make rmmod; tail -100f /var/log/messages) 2) it should print remote codes to the message log when you press remote keys. Write down which key gives which code. Here is example what it should output to the message-log when key is pressed; af9015_rc_query: 00 00 1e 00 00 00 00 00 af9015_rc_query: 00 00 1f 00 00 00 00 00 af9015_rc_query: 00 00 20 00 00 00 00 00 af9015_rc_query: 00 00 21 00 00 00 00 00 report like: number 1 = af9015_rc_query: 00 00 1f 00 00 00 00 00 channel up = af9015_rc_query: 00 00 1f 00 00 00 00 00 volume down = af9015_rc_query: 00 00 20 00 00 00 00 00 > Thank you so much for this. > > Regards, > Alistair. regards Antti -- http://palosaari.fi/ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
