Hi all, some days ago I bought the DVB-C Card 'Technisat CableStar HD2'. After I've installed it I did a short test on Win XP SP3 - the card is working properly there. In order to make it work under Linux, I compiled and installed the latest mantis sources (downloaded from http://jusst.de/hg/mantis). The compilation was successful after I've patched the sources with http://www.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc4/2.6.24-rc4-mm1/broken-out/fix-jdelvare-i2c-i2c-constify-client-address-data.patch and after I've deactivated the option KS0127. The modes are now loaded successfully (at least it seems so) during boot. However, a channel search is never successful, no matter which transponder list or frontend application (or directly dvbscan) I use. dmesg shows after the failed scan: mantis_ack_wait (0): Slave RACK Fail ! I did a search and only found a few comments and linux-dvb mails on the web, but no solution to this problem, so I'm contacting you directly. Here is some information about my system: - openSUSE 11.0 - uname -r: 2.6.25.5-1.1-pae dmesg shows (on module load): ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 22 (level, low) -> IRQ 22 irq: 22, latency: 64 memory: 0xf8fff000, mmio: 0xf9652000 found a VP-2040 PCI DVB-C device on (02:07.0), Mantis Rev 1 [1ae4:0002], irq: 22, latency: 64 memory: 0xf8fff000, mmio: 0xf9652000 MAC Address=[00:08:c9:d0:11:98] mantis_alloc_buffers (0): DMA=0x36810000 cpu=0xf6810000 size=65536 mantis_alloc_buffers (0): RISC=0x37f94000 cpu=0xf7f94000 size=1000 DVB: registering new adapter (Mantis dvb adapter) mantis_frontend_init (0): Probing for CU1216 (DVB-C) mantis_frontend_init (0): found Philips CU1216 DVB-C frontend (TDA10023) @ 0x0c mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success DVB: registering frontend 0 (Philips TDA10023 DVB-C)... mantis_ca_init (0): Registering EN50221 device mantis_ca_init (0): Registered EN50221 device mantis_hif_init (0): Adapter(0) Initializing Mantis Host Interface /dev/dvb/adapter0 contains: -ca0 -demux0 -dvr0 -frontend0 -net0 lsmod output is attached... If I can provide more information in order to solve the problem, I will definitely do so, just give me some hints. ;-) Thanks in advance and best regards, Sebastian
Module Size Used by iptable_filter 19840 0 ip_tables 30224 1 iptable_filter snd_pcm_oss 64256 0 snd_mixer_oss 33408 1 snd_pcm_oss snd_seq_midi 26112 0 ip6table_filter 19712 0 ip6_tables 31376 1 ip6table_filter snd_emu10k1_synth 24832 0 x_tables 33668 2 ip_tables,ip6_tables snd_emux_synth 54272 1 snd_emu10k1_synth ipv6 281064 22 snd_seq_virmidi 23680 1 snd_emux_synth snd_seq_midi_event 23936 2 snd_seq_midi,snd_seq_virmidi snd_seq_midi_emul 22784 1 snd_emux_synth snd_seq 73664 5 snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_event,snd_seq_midi_emul af_packet 38656 0 cpufreq_conservative 24456 0 cpufreq_userspace 22660 0 cpufreq_powersave 18176 0 powernow_k8 31748 0 sha256_generic 28800 0 aes_i586 24704 2 aes_generic 44072 1 aes_i586 cbc 20736 1 uhci_hcd 40848 0 dm_crypt 32132 1 crypto_blkcipher 36356 3 cbc,dm_crypt fuse 66332 3 loop 35332 0 dm_mod 78676 3 dm_crypt snd_emu10k1 162948 3 snd_emu10k1_synth snd_rawmidi 42496 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1 firmware_class 25984 1 snd_emu10k1 snd_ac97_codec 120868 1 snd_emu10k1 mantis 59396 0 ac97_bus 18304 1 snd_ac97_codec lnbp21 18560 1 mantis snd_pcm 100100 3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec mb86a16 36096 1 mantis snd_seq_device 25100 6 snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq,snd_emu10k1,snd_rawmidi stb6100 24196 1 mantis tda10021 22788 1 mantis snd_timer 40712 3 snd_seq,snd_emu10k1,snd_pcm tda10023 22788 1 mantis snd_page_alloc 27400 2 snd_emu10k1,snd_pcm i2c_piix4 25484 0 snd_util_mem 21632 2 snd_emux_synth,snd_emu10k1 stb0899 52352 1 mantis usbhid 60260 0 8139too 43008 0 stv0299 27016 1 mantis rtc_cmos 27168 0 snd_hwdep 26372 2 snd_emux_synth,snd_emu10k1 8139cp 39808 0 dvb_core 104296 2 mantis,stv0299 nvidia 7121088 24 sr_mod 33320 0 ati_agp 25484 0 snd 79544 20 snd_pcm_oss,snd_mixer_oss,snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq_device,snd_timer,snd_util_mem,snd_hwdep rtc_core 37148 1 rtc_cmos ohci1394 48432 0 hid 53708 1 usbhid emu10k1_gp 20224 0 ieee1394 107016 1 ohci1394 rtc_lib 19328 1 rtc_core gameport 31500 2 emu10k1_gp cdrom 50588 1 sr_mod button 25360 0 mii 21888 2 8139too,8139cp i2c_core 41108 10 mantis,lnbp21,mb86a16,stb6100,tda10021,tda10023,i2c_piix4,stb0899,stv0299,nvidia agpgart 50868 2 nvidia,ati_agp soundcore 24264 1 snd ff_memless 21896 1 usbhid sg 52020 0 ehci_hcd 52492 0 ohci_hcd 39940 0 sd_mod 45208 5 usbcore 164684 5 uhci_hcd,usbhid,ehci_hcd,ohci_hcd edd 26440 0 ext3 155784 2 mbcache 25348 1 ext3 jbd 73376 1 ext3 fan 22660 0 ahci 45960 4 pata_atiixp 24320 0 libata 176220 2 ahci,pata_atiixp scsi_mod 168308 4 sr_mod,sg,sd_mod,libata dock 27536 1 libata thermal 39452 0 processor 67504 2 powernow_k8,thermal
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
