terve Andrew, Andrew Websdale wrote: > Hi All, > > I've been trying to amend the M920x driver to cope with the MT2060 > tuner. My dmesg output looks encouraging : > usb 5-1: new high speed USB device using ehci_hcd and address 5 > usb 5-1: configuration #1 chosen from 1 choice > Probing for m920x device at interface 0 > dvb-usb: found a 'Dposh(mt2060 tuner) DVB-T USB2.0' in warm state. > dvb-usb: will pass the complete MPEG2 transport stream to the software > demuxer. > DVB: registering new adapter (Dposh(mt2060 tuner) DVB-T USB2.0) > m920x_mt352_frontend_attach > DVB: registering frontend 0 (Zarlink MT352 DVB-T)... > m920x_mt2060_tuner_attach > MT2060: successfully identified (IF1 = 1220) > dvb-usb: Dposh(mt2060 tuner) DVB-T USB2.0 successfully initialized and > connected. > > but scanning produces no result. I thought it might be the firmware so I > used USBSnoop ( ver 2.0 from here > <http://www.pcausa.com/Utilities/UsbSnoop/SniffUSB-x86-2.0.0006.zip> , > I think its slightly easier to use than the original) and extracted a > new firmware file (attached) . The firmware loaded without complaint, > but still no scan result. I'm a bit stuck now, anyone got any > suggestions as to how I should proceed? I have following list to check: 1) firmware (you tested this one already) 2) demodulator (it is MT352 I think, but configuration / settings could be wrong) 3) wrong endpoint used for mpeg ts I can help if you take sniffs with usbsnoop, but hopefully you will find error yourself. http://benoit.papillault.free.fr/usbsnoop/ regards Antti -- http://palosaari.fi/ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
