I included wrong kind of lspci output; subsystem id didn't show up. But here come the right ones:
lspci -d 1822:4e35 -vn gives the following:
administrator@hydra:~$ administrator@hydra:~$ lspci -d 1822:4e35 -vn
00:08.0 0480: 1822:4e35 (rev 01)
Subsystem: 153b:1178
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at fc020000 (32-bit, prefetchable) [size=4K]
but without -d option, which is lspci -vn:
administrator@hydra:~$ lspci -vn
.
.
.
00:08.0 0480: 1822:4e35 (rev 01) (prog-if 02)
Subsystem: 173b:1178
Flags: bus master, fast Back2Back, medium devsel, latency 34, IRQ 20
Memory at fc020000 (32-bit, prefetchable) [size=4K]
Memory at <ignored> (32-bit, non-prefetchable)
Memory at <ignored> (32-bit, non-prefetchable)
Memory at <ignored> (32-bit, non-prefetchable)
Memory at <ignored> (32-bit, non-prefetchable)
Memory at <ignored> (32-bit, non-prefetchable)
Expansion ROM at <unassigned> [disabled]
.
.
.
You see, the subsystem ids differ: 153b:1178 and 173b:1178. I don't know what that means, but hopefully someone else does.
lspci -vnn says:
00:08.0 Multimedia controller [0480]: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] [1822:4e35] (rev 01) (prog-if 02)
Subsystem: Altima (nee Broadcom) Unknown device [173b:1178]
Is it possible to get this card working in linux (in the near future)?
Mikko Mäkinen
2008/6/25 Mikko Mäkinen <mikko.reijo.makinen@xxxxxxxxx>:
Hello everybody,
I've been trying to get my recently (yesterday) bought dvb-c tuner working under Ubuntu Hardy. Installed drivers from http://www.jusst.de/hg/mantis, and the /dev/dvb got populated, but without frontend.
Output from lspci:
administrator@hydra:~$ lspci -d 1822:4e35 -vv
00:08.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01)
Subsystem: TERRATEC Electronic GmbH Unknown device 1178
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR+ <PERR+
Latency: 32 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fc020000 (32-bit, prefetchable) [size=4K]
PCI id seems to have changed from the earlier Cinergy C cards.
Output (partial) from dmesg:
[ 33.894498] found a VP-2040 PCI DVB-C device on (00:08.0),
[ 33.894502] Mantis Rev 1 [153b:1178], irq: 20, latency: 32
[ 33.894507] memory: 0xfc020000, mmio: 0xf8972000
[ 33.897204] MAC Address=[00:08:c8:1c:80:c0]
[ 33.897246] mantis_alloc_buffers (0): DMA=0x374c0000 cpu=0xf74c0000 size=65536
[ 33.897253] mantis_alloc_buffers (0): RISC=0x1f9e3000 cpu=0xdf9e3000 size=1000
[ 33.897258] DVB: registering new adapter (Mantis dvb adapter)
[ 33.926286] input: Power Button (FF) as /devices/virtual/input/input4
[ 33.944481] ACPI: Power Button (FF) [PWRF]
[ 33.944568] input: Power Button (CM) as /devices/virtual/input/input5
[ 33.976486] ACPI: Power Button (CM) [PWRB]
[ 33.976625] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 33.988428] ACPI: Sleep Button (CM) [SLPB]
[ 34.416113] mantis_frontend_init (0): Probing for CU1216 (DVB-C)
[ 34.418214] mantis_frontend_init (0): !!! NO Frontends found !!!
[ 34.418220] mantis_ca_init (0): Registering EN50221 device
[ 34.475764] mantis_ca_init (0): Registered EN50221 device
[ 34.475777] mantis_hif_init (0): Adapter(0) Initializing Mantis Host Interface
Even I managed to notice one line stating: "!!! NO Frontends found !!!", so I guess it's no wonder it isn't working.
Does anyone have a clue what I should try next? Or has anyone had success with this card. I couldn't find earlier models, like cinergy 1200-c, or even newer, anywhere. I'm supposed to build a DVB to IP streaming machine for a school, so I would also be happy if someone knew any other available DVB-C cards working under linux.
Best regards,
Mikko Mäkinen
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
