Sigmund Augdal schrieb: > On Mon, 2008-06-16 at 08:14 +0300, Arthur Konovalov wrote: >> SG wrote: >> > The patch works quite well and nearly all channels seem to work. >> > >> > But when tuning to some radio channels I'll get this kernel message: >> > >> > saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer >> > >> > Also I'm not able to tune to 'transponder 386000000 6900000 0 3' which works >> > smoothly when using Win32. >> > >> > initial transponder 386000000 6900000 0 3 >> > >>> tune to: 386:M64:C:6900: >> > WARNING: >>> tuning failed!!! >> > >>> tune to: 386:M64:C:6900: (tuning failed) >> > WARNING: >>> tuning failed!!! >> > ERROR: initial tuning failed >> > dumping lists (0 services) >> > Done. >> >> Yes, I discovered too that tuning to frequency 386MHz has no lock. >> VDR channels.conf: TV3:386000:C0M64:C:6875:703:803:0:0:1003:16:1:0 >> >> At same time, 394MHz (and others) works. > Hi. > > Both transponders reported to not tune here has different symbolrates > from what I used for my testing. Maybe this is relevant in some way. > Could you please compare this with the channels that did tune to see if > there is a pattern? > > About the i2c message, I get that every now and then here as well, but I > have not seen any ill effect from it. I also see that on some other TT > cards so I think that might be unrelated to the demod/tuner. > > Regards > > Sigmund Augdal The symbolrate is the same on all other working channels. Regarding the i2c message when watching video I'll get this only once but when tuning to a radio channel my log gets flooded and it seems to hangup. Martin _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
