Approximately a year ago I tried to make this USB DVB-T box work. But it wouldn't. With a little more knowledge today I tried again with v4l-dvb from hg, but it still won't go. I get this when I plug it in: [ 3083.152125] usb 1-2: new full speed USB device using ohci_hcd and address 4 [ 3083.253055] usb 1-2: configuration #1 chosen from 1 choice [ 3083.258204] flexcop_usb: running at FULL speed. [ 3083.501399] DVB: registering new adapter (FlexCop Digital TV device) [ 3083.502758] b2c2-flexcop: MAC address = 00:d0:d7:09:e7:70 [ 3083.516842] CX24123: wrong demod revision: 0 [ 3083.612219] b2c2-flexcop: found 'Zarlink MT352 DVB-T' . [ 3083.612226] DVB: registering frontend 1 (Zarlink MT352 DVB-T)... [ 3083.612261] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'USB' bus controlled by a 'FlexCopIII' complete [ 3083.621757] flexcop_usb: Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver successfully initialized and connected. Note the "CX24123: wrong demod revision: 0". What's with that? It looks like something is wrong. I get this when I unplug it: [ 3081.464885] flexcop_usb: iso frame descriptor 0 has an error: -62 [ 3081.464887] [ 3081.464892] flexcop_usb: iso frame descriptor 1 has an error: -62 [ 3081.464893] [ 3081.464895] flexcop_usb: iso frame descriptor 2 has an error: -62 [ 3081.464896] [ 3081.464897] flexcop_usb: iso frame descriptor 3 has an error: -62 [ 3081.464898] [ 3081.468884] flexcop_usb: iso frame descriptor 0 has an error: -62 [ 3081.468886] [ 3081.468891] flexcop_usb: iso frame descriptor 1 has an error: -62 [ 3081.468892] [ 3081.468894] flexcop_usb: iso frame descriptor 2 has an error: -62 [ 3081.468895] [ 3081.468896] flexcop_usb: iso frame descriptor 3 has an error: -62 [ 3081.468897] [ 3081.472876] flexcop_usb: iso frame descriptor 0 has an error: -62 [ 3081.472877] [ 3081.472879] flexcop_usb: iso frame descriptor 1 has an error: -62 [ 3081.472880] [ 3081.472881] flexcop_usb: iso frame descriptor 2 has an error: -62 [ 3081.472882] [ 3081.472883] flexcop_usb: iso frame descriptor 3 has an error: -62 [ 3081.472885] [ 3081.475209] usb 1-2: USB disconnect, address 3 [ 3081.479869] flexcop_usb: iso frame descriptor 0 has an error: -62 [ 3081.479871] [ 3081.479873] flexcop_usb: iso frame descriptor 1 has an error: -62 [ 3081.479874] [ 3081.479875] flexcop_usb: iso frame descriptor 2 has an error: -62 [ 3081.479876] [ 3081.479877] flexcop_usb: iso frame descriptor 3 has an error: -18 [ 3081.479878] [ 3081.479880] flexcop_usb: iso frame descriptor 0 has an error: -18 [ 3081.479881] [ 3081.479883] flexcop_usb: iso frame descriptor 1 has an error: -18 [ 3081.479884] [ 3081.479885] flexcop_usb: iso frame descriptor 2 has an error: -18 [ 3081.479886] [ 3081.479887] flexcop_usb: iso frame descriptor 3 has an error: -18 [ 3081.479888] [ 3081.479890] flexcop_usb: iso frame descriptor 0 has an error: -18 [ 3081.479891] [ 3081.479892] flexcop_usb: iso frame descriptor 1 has an error: -18 [ 3081.479893] [ 3081.479895] flexcop_usb: iso frame descriptor 2 has an error: -18 [ 3081.479896] [ 3081.479897] flexcop_usb: iso frame descriptor 3 has an error: -18 [ 3081.479898] [ 3081.479900] flexcop_usb: iso frame descriptor 0 has an error: -18 [ 3081.479901] [ 3081.479902] flexcop_usb: iso frame descriptor 1 has an error: -18 [ 3081.479903] [ 3081.479904] flexcop_usb: iso frame descriptor 2 has an error: -18 [ 3081.479905] [ 3081.479906] flexcop_usb: iso frame descriptor 3 has an error: -18 [ 3081.479907] [ 3081.480307] flexcop_usb: Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver successfully deinitialized and disconnected. I think it doesn't like being unplugged. The problem is still the same: I see the device in /dev/dvb and in Kaffeine, when I try to watch a channel I see the ACT LED on the device blink a bit, but the LOCK LED will never light up and I never get to watch anything. Using Ubuntu 8.04. P. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
