Re: Smit CAM problems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Did you try to contact SMIT support ?

Vladimir Prudnikov a écrit :
> Didn't try Aston CAMs with mpeg4. But they do up to 12 channels of  
> mpeg2 perfectly well. With no problems at all. SMiTs that are for 8  
> services can do only 3 to 4 for me.
> I think it's some kind of a driver bug because it begins working after  
> reinitialisation. Doesn't get hot. I have tried to call Aston as well  
> but with no success yet.
> 
> Regards,
> Vladimir
> 
> On Jun 12, 2008, at 2:56 PM, dan.lita@xxxxxxxxx wrote:
> 
>> Dear Vladimir,
>>
>> I read your post on linux-dvb list. We have an Aston Viaccess  
>> Professional 2.15 CAM .
>> I read that you also use Aston CAMS.  My question is whether your  
>> Aston Viaccess cam can descramble H264  feeds or not?
>> We have tried on a PACE HDTV receiver and a Tandberg unit and it  
>> does not descramble the H264 video pid. (black screen)
>> This does not happen with Viaccess RED cam.
>>
>> On older Common interface adapters from Technotrend, the one for TT  
>> Premium DVB-S card, there was a jumper for 3V or 5V cam operation.
>> I assume the new CI adapter does not have such jumper. If it still  
>> exist maybe it will be a good idea to switch from one voltage to the  
>> other.
>> Another solution is to test whether it works or not for Irdeto to  
>> use an Alphacrypt Classic CAM which, at least in theory, according  
>> to MASCOM, supports Irdeto.
>> The third thing is to notice whether the SMIT cam gets hot in  
>> operation. If it gets too hot maybe a fan similar to the one for  
>> graphics card must be put near the Common interface adapter.
>>
>> BTW. Do you have any e-mail address from Aston? I have tried to  
>> contact  them but there is no e-mail address in their website.
>>
>> Best regards,
>> Dan Lita
>>
>>
>> Vladimir Prudnikov wrote:
>>> Hello!
>>>
>>> I'm using SMIT cams to descramble channels on TT S-1500 and TT-  
>>> S2-3200. After some time of normal operation SMIT cams drop out  
>>> and  stop decrypting the stream. It needs to be removed from the CI  
>>> slot  and reinserted to resume normal operation. Aston CAMs have no  
>>> such  problems, but they don't support 0x652 Irdeto.
>>> I'm streaming with vlc. Tried many SMITs (Viaccess and Irdeto).  
>>> Same  problem everywhere.
>>>
>>> Regards,
>>> Vladimir
>>>
>>> _______________________________________________
>>> linux-dvb mailing list
>>> linux-dvb@xxxxxxxxxxx
>>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>>
>>>
>>>
> 
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> 


-- 
CAND Frederic
Product Manager
ANEVIA

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux