I'm using multiproto and this works 100% just tested with two machines.I'm not sure if multiproto_plus is using new API or the old one anywaythe best advice that i can give you is to try the old scan without any patches. http://jusst.de/manu/scan.tar.bz2 Good Luck Faruk On Sat, Jun 7, 2008 at 8:50 PM, Goga777 <goga777@xxxxx> wrote:> Приветствую, Faruk>> I have downloaded scan from http://www.zshare.net/download/1322006118c9c70a/> and I have the same errors with my hvr4000 (I use the latest multiproto_plus + hvr4000 patch from 2 May )>> goga:/usr/src/dvb-apps/util/scan_faruc# goga:/usr/src/dvb-apps/util/scan_faruc# ./scan 13e> scanning 13e> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'> initial transponder 12398000 H 27500000 27500000> initial transponder 11258000 H 27500000 27500000> initial transponder 11449000 H 27500000 27500000> initial transponder 11996000 V 27500000 27500000> initial transponder 12265000 V 27500000 27500000>>> ioctl DVBFE_GET_INFO failed: Operation not supported> ioctl DVBFE_GET_INFO failed: Operation not supported> ioctl DVBFE_GET_INFO failed: Operation not supported> ioctl DVBFE_GET_INFO failed: Operation not supported> ioctl DVBFE_GET_INFO failed: Operation not supported> ioctl DVBFE_GET_INFO failed: Operation not supported> ERROR: initial tuning failed> dumping lists (0 services)> Done.>> goga:/usr/src/dvb-apps/util/scan_faruc# make clean> cleaning> goga:/usr/src/dvb-apps/util/scan_faruc# make> perl section_generate.pl atsc_psip_section.pl> CC scan.o> scan.c:414: warning: unused parameter 'buf'> scan.c:415: warning: unused parameter 't'> scan.c:449: warning: unused parameter 'buf'> scan.c:518: warning: unused parameter 'buf'> scan.c:519: warning: unused parameter 't'> scan.c: In function 'tune_initial':> scan.c:1891: warning: unused variable 'hier'> scan.c:1891: warning: unused variable 'guard'> scan.c:1891: warning: unused variable 'mode'> scan.c:1891: warning: unused variable 'fec2'> scan.c:1891: warning: unused variable 'bw'> scan.c:1891: warning: unused variable 'qam'> scan.c: At top level:> scan.c:1808: warning: 'str2qam' defined but not used> scan.c:1825: warning: 'str2bandwidth' defined but not used> scan.c:1837: warning: 'str2mode' defined but not used> scan.c:1848: warning: 'str2guard' defined but not used> scan.c:1861: warning: 'str2hier' defined but not used> scan.c:2080: warning: 'pids_dump_service_parameter_set' defined but not used> CC atsc_psip_section.o> CC diseqc.o> CC dump-vdr.o> CC dump-zap.o> dump-zap.c:6: warning: 'inv_name' defined but not used> dump-zap.c:12: warning: 'fec_name' defined but not used> dump-zap.c:26: warning: 'qam_name' defined but not used> dump-zap.c:39: warning: 'bw_name' defined but not used> dump-zap.c:47: warning: 'mode_name' defined but not used> dump-zap.c:53: warning: 'guard_name' defined but not used> dump-zap.c:62: warning: 'hierarchy_name' defined but not used> CC lnb.o> CC section.o> CC scan> goga:/usr/src/dvb-apps/util/scan_faruc# ./scan 13e> scanning 13e> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'> initial transponder 12398000 H 27500000 27500000> initial transponder 11258000 H 27500000 27500000> initial transponder 11449000 H 27500000 27500000> initial transponder 11996000 V 27500000 27500000> initial transponder 12265000 V 27500000 27500000>>>> ioctl DVBFE_GET_INFO failed: Operation not supported> ioctl DVBFE_GET_INFO failed: Operation not supported> ioctl DVBFE_GET_INFO failed: Operation not supported> ioctl DVBFE_GET_INFO failed: Operation not supported> ioctl DVBFE_GET_INFO failed: Operation not supported> ERROR: initial tuning failed> dumping lists (0 services)> Done.>>>> _______________________________________________> linux-dvb mailing list> linux-dvb@xxxxxxxxxxx> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb_______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
