Re: Terratec Cinergy S2 PCI HD ioctl DVBFE_GET_INFO failed:Operation not supported

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Zeno!

If i remember correctly i think i got Hunk failed too i had to paste
it manually.
here is my copy already been patched and compiled. If the binary scan
doesn't work run "make clean" and then "make"
http://www.zshare.net/download/1322006118c9c70a/

Faruk


On Sat, Jun 7, 2008 at 7:17 PM, Zeno Zoli <zeno.zoli@xxxxxxxxx> wrote:
> Tried, and got
>
> Hunk #1 FAILED at 1674.
> Hunk #2 FAILED at 1693.
> Hunk #3 FAILED at 1704.
>
>
>
> On Fri, Jun 6, 2008 at 2:50 PM, Faruk A <fa@xxxxxxxxx> wrote:
>>
>> Hi Zeno!
>>
>> Apply this patch.
>>
>> diff -Naur 1/scan.c 2/scan.c
>> --- 1/scan.c    2008-04-03 02:00:19.000000000 +0200
>> +++ 2/scan.c    2008-04-03 12:29:32.000000000 +0200
>> @@ -1674,15 +1674,18 @@
>>        }
>>
>>         struct dvbfe_info fe_info1;
>> +       enum dvbfe_delsys delivery;
>>
>>         // a temporary hack, need to clean
>>         memset(&fe_info1, 0, sizeof (struct dvbfe_info));
>>
>>         if(t->modulation_system == 0)
>> -            fe_info1.delivery = DVBFE_DELSYS_DVBS;
>> +            delivery = DVBFE_DELSYS_DVBS;
>>         else if(t->modulation_system == 1)
>> -            fe_info1.delivery = DVBFE_DELSYS_DVBS2;
>> -
>> +            delivery = DVBFE_DELSYS_DVBS2;
>> +
>> +        ioctl(frontend_fd, DVBFE_SET_DELSYS, &delivery); //switch system
>> +
>>         int result = ioctl(frontend_fd, DVBFE_GET_INFO, &fe_info1);
>>         if (result < 0) {
>>             perror("ioctl DVBFE_GET_INFO failed");
>> @@ -1690,7 +1693,7 @@
>>             return -1;
>>         }
>>
>> -        switch (fe_info1.delivery) {
>> +        switch (delivery) {
>>             case DVBFE_DELSYS_DVBS:
>>                 info("----------------------------------> Using '%s'
>> DVB-S\n", fe_info.name);
>>                 break;
>> @@ -1701,7 +1704,7 @@
>>                 info("----------------------------------> Using '%s'
>> DVB-S2\n", fe_info.name);
>>                 break;
>>             default:
>> -                info("Unsupported Delivery system (%d)!\n",
>> fe_info1.delivery);
>> +                info("Unsupported Delivery system (%d)!\n", delivery);
>>                 t->last_tuning_failed = 1;
>>                 return -1;
>>         }
>>
>>
>>
>> 2008/6/6 Zeno Zoli <zeno.zoli@xxxxxxxxx>:
>> > I suppose so
>> >
>> > wget http://jusst.de/manu/scan.tar.bz2
>> > from http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_S2_PCI_HD_CI
>> >
>> >
>> >
>> >
>> >
>> > 2008/6/6 Goga777 <goga777@xxxxx>:
>> >>
>> >> which scan version do you use ? does it support the multiproto api ?
>> >>
>> >>
>> >>
>> >>
>> >> > I'm new to DVB on linux, but have some linux experience. I have
>> >> > trouble
>> >> > to
>> >> > get my new Terratec Cinergy S2 PCI HD to work properly. I have
>> >> > followed
>> >> > the
>> >> > guide here:
>> >> > http://linuxtv.org/wiki/index.php/TerraTec_Cinergy_S2_PCI_HD_CI
>> >> >
>> >> > I get "ioctl DVBFE_GET_INFO failed: Operation not supported"
>> >> > when I try to ./scan -vv dvb-s/Thor-1.0W ( more info below)
>> >> >
>> >> > Could it be related to my choice of Ubuntu 2.6.24-16-server?
>> >> > Thanks for your help.
>> >> >
>> >> > Zeno.
>> >> >
>> >> >
>> >> > uname -a
>> >> > Linux htpc 2.6.24-16-server #1 SMP i686 GNU/Linux
>> >> >
>> >> > /home/htpc/scan# ./scan -vv dvb-s/Thor-1.0W
>> >> > scanning dvb-s/Thor-1.0W
>> >> > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>> >> > initial transponder 11247000 V 24500000 24500000
>> >> > initial transponder 11293000 H 24500000 24500000
>> >> > initial transponder 11325000 H 24500000 24500000
>> >> > initial transponder 12054000 H 28000000 28000000
>> >> > initial transponder 12169000 H 28000000 28000000
>> >> > initial transponder 12226000 V 28000000 28000000
>> >> > ioctl DVBFE_GET_INFO failed: Operation not supported
>> >> > ioctl DVBFE_GET_INFO failed: Operation not supported
>> >> > ioctl DVBFE_GET_INFO failed: Operation not supported
>> >> > ioctl DVBFE_GET_INFO failed: Operation not supported
>> >> > ioctl DVBFE_GET_INFO failed: Operation not supported
>> >> > ioctl DVBFE_GET_INFO failed: Operation not supported
>> >> > ERROR: initial tuning failed
>> >> > dumping lists (0 services)
>> >> >
>> >> > lsmod
>> >> >
>> >> > lnbp21                  3200  1 mantis
>> >> > mb86a16                21632  1 mantis
>> >> > stb6100                 8836  1 mantis
>> >> > tda10021                7684  1 mantis
>> >> > tda10023                7300  1 mantis
>> >> > stb0899                36224  1 mantis
>> >> > stv0299                11528  1 mantis
>> >> > dvb_core               89212  2 mantis,stv0299
>> >> >
>> >> >
>> >> > dmesg
>> >> >
>> >> >  36.793511] found a VP-1041 PCI DSS/DVB-S/DVB-S2 device on (02:09.0),
>> >> > [   36.793513]     Mantis Rev 1 [153b:1179], irq: 20, latency: 64
>> >> > [   36.793515]     memory: 0xfddff000, mmio: 0xf8a54000
>> >> > [   36.796981]     MAC Address=[00:08:ca:1c:a8:e9]
>> >> > [   36.797011] mantis_alloc_buffers (0): DMA=0x37560000
>> >> > cpu=0xf7560000
>> >> > size=65536
>> >> > [   36.797061] mantis_alloc_buffers (0): RISC=0x37501000
>> >> > cpu=0xf7501000
>> >> > size=1000
>> >> > [   36.797107] DVB: registering new adapter (Mantis dvb adapter)
>> >> > [   37.345712] stb0899_get_dev_id: Device ID=[8], Release=[2]
>> >> > [   37.358369] stb0899_get_dev_id: Demodulator Core ID=[DMD1],
>> >> > Version=[1]
>> >> > [   37.371023] stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1]
>> >> > [   37.371074] stb0899_attach: Attaching STB0899
>> >> > [   37.371076] mantis_frontend_init (0): found STB0899 DVB-S/DVB-S2
>> >> > frontend
>> >> > @0x68
>> >> > [   37.371135] stb6100_attach: Attaching STB6100
>> >> > [   37.371491] DVB: registering frontend 0 (STB0899 Multistandard)...
>> >> > [   37.371523] mantis_ca_init (0): Registering EN50221 device
>> >> > [   37.372914] mantis_ca_init (0): Registered EN50221 device
>> >> > [   37.372973] mantis_hif_init (0): Adapter(0) Initializing Mantis
>> >> > Host
>> >> > Interface
>> >> >
>> >> > lspci -v
>> >> > 02:09.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV
>> >> > PCI
>> >> > Bridge Controller [Ver 1.0] (rev 01)
>> >> >         Subsystem: TERRATEC Electronic GmbH Unknown device 1179
>> >> >         Flags: bus master, medium devsel, latency 64, IRQ 20
>> >> >         Memory at fddff000 (32-bit, prefetchable) [size=4K]
>> >>
>> >> >
>> >>
>> >> _______________________________________________
>> >> linux-dvb mailing list
>> >> linux-dvb@xxxxxxxxxxx
>> >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>> >
>> >
>> > _______________________________________________
>> > linux-dvb mailing list
>> > linux-dvb@xxxxxxxxxxx
>> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>> >
>
>

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux