Re: DViCO Fusion HDTV DVB-T Dual Express - When will it be

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Also, just wondering if anyone was planning to look at building lirc
based remote support for the packaged remote (not ir-tty as I don't want
to remap the shortcut keys) 
On Tue, 2008-05-13 at 18:57 +1000, stev391@xxxxxxxxx wrote:
> Allan,
> 
> If you have used the v4l-dvb hg drivers and my patch the card should
> auto detect, however if you want to force it, the number should be 10.
> 
> If you are using Chris Pascoe's xc-test branch then 5 is the correct
> card number, but again it should auto detect.
> 
> Please advise which driver source you have been using.
> 
> Regards Stephen.
> 
>         ----- Original Message -----
>         From: "allan k" 
>         To: stev391@xxxxxxxxx
>         Subject: Re:  DViCO Fusion HDTV DVB-T Dual Express
>         - When will it be
>         Date: Tue, 13 May 2008 18:19:27 +1000
>         
>         
>         Hi Steve
>         I had the wrong card number selected. I have changed to card=5
>         and the
>         tuner is now working correctly.
>         
>         I haven't restarted the machine, but will do so later and
>         confirm
>         whether I am getting the same problem as you saw on one of
>         your boxes.
>         
>         cheers
>         
>         Allan
>         
>         
>         
>         
>         
>         
>         
>         
>         On Sat, 2008-05-10 at 18:14 +1000, stev391@xxxxxxxxx wrote:
>         > Allan,
>         >
>         > It was tested with in two different machines against the
>         cx23885
>         > version of the card. However the next day I built another
>         machine
>         > with this card and I ran into errors in my dmesg stating
>         that the
>         > firmware version doesn't match. I haven't had enough time to
>         find out
>         > why this has happened, but I think the tuner is not being
>         reset
>         > properly. What are your results of running this patch?
>         >
>         > Regards,
>         >
>         > Stephen
>         >
>         > ----- Original Message -----
>         > From: "sonofzev@xxxxxxxxxxxx" To: 
>         > linux-dvb@xxxxxxxxxxx, stev391@xxxxxxxxx
>         > Subject: Re:  DViCO Fusion HDTV DVB-T Dual
>         Express
>         > - When will it be
>         > Date: Thu, 08 May 2008 18:02:00 +0800
>         >
>         >
>         > Hi Stephen, Has this been tested with the 
>         > newer cx23885 version of the
>         > card or only the older cx88 version. I have had 
>         > no success with my cx23885 version. cheers
>         >
>         > Allan
>         >
>         >
>         > On Tue May 6 11:39 , stev391@xxxxxxxxx sent:
>         >
>         > G'day,
>         >
>         > I was just wondering when Chris Pascoe's code for the
>         > DViCO Fusion HDTV Dual Express will be merged into the
>         > v4l-dvb tree, as there have been some minor updates
>         > that increase the stability of the card that are not
>         > in his tree.
>         >
>         > Attached is a patch for merging the relevant sections
>         > back into the v4l-dvb tree (and including updating
>         > Kconfig). This has been successfully tested on two
>         > different PCs with this card (working with gxine and
>         > mythtv, in Melbourne, Australia).
>         >
>         > Regards,
>         > Stephen.
>         >
>         >
>         > -- See Exclusive Video: 10th 
>         > Annual Young Hollywood
>         > Awards
>         >
>         >
>         >
>         > -- See Exclusive Video: 10th Annual Young Hollywood Awards
>         >
> 
> -- 
> See Exclusive Video: 10th Annual Young Hollywood Awards
> 

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux