sorry, I was wrong with the latest cumulative hvr4000-patch from Gregoire HVR-4000-multiproto_plus-2008-05-02.diff.bz2 I can tune on dvb-s2 channels on my VDR 170 this patch is OK for me @Gregoire thank you very much Igor -----Original Message----- From: Igor <goga777@xxxxx> To: VDR Mailing List <vdr@xxxxxxxxxxx> Date: Sat, 03 May 2008 22:51:26 +0400 Subject: Re: [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus > > > > > Have you replaced linux/include/linux/compiler.h with the one from your > > > > kernel ? (in multiproto_plus dir) if that's going to be included, this > > > > shouldn't be in of course. > > > > > > your patch included the compiler.h, after replacing it with the right > > > one the drivers are build > > > your patch also created a .config.old in v4l and the cx88 modules are > > > not build (the .config created during make does only contain inaktive > > > lines for cx88 modules), i modified the .config manual and started make > > > again > > > > OK, here's one without compiler.h and without .config.old (by the way, I > > don't understand why make distclean didn't remove it...). > > > > Good new, such way the patch is even smaller, so it would be really good > > to have it included finally into the repo :-) > > > > Any objection to the inclusion ? > > with this patch I have the error > > May 3 22:42:15 localhost vdr: [3471] ERROR (dvbdevice.c,302): Invalid argument > > when I try to tune on dvb-s2 channels on VDR > > But with HVR-4000-multiproto_plus-2008-04-25.diff + "HVR-4000-multiproto_plus-2008-04-25_inversion" is OK for me _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
