Re: [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> > > Have you replaced linux/include/linux/compiler.h with the one from your
> > > kernel ? (in multiproto_plus dir) if that's going to be included, this
> > > shouldn't be in of course.
> > 
> > your patch included the compiler.h, after replacing it with the right
> > one the drivers are build
> > your patch also created a .config.old in v4l and the cx88 modules are
> > not build (the .config created during make does only contain inaktive
> > lines for cx88 modules), i modified the .config manual and started make
> > again
> 
> OK, here's one without compiler.h and without .config.old (by the way, I
> don't understand why make distclean didn't remove it...).
> 
> Good new, such way the patch is even smaller, so it would be really good
> to have it included finally into the repo :-)
> 
> Any objection to the inclusion ?

with this patch I have the error

May  3 22:42:15 localhost vdr: [3471] ERROR (dvbdevice.c,302): Invalid argument

when I try to tune on dvb-s2 channels on VDR

But with HVR-4000-multiproto_plus-2008-04-25.diff + "HVR-4000-multiproto_plus-2008-04-25_inversion" is OK for me

Igor








_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux