Sigmund Augdal wrote: > The init-tab part of tda10023.c seems to indicate which posisions are > which registers in the chip. There are in particular two that are called > DELTAF_MSB and DELTAF_LSB, which is currently set to 0xFFF0. I guess > this would be a key thing to change, but what needs to be changed in the > tuner driver? I've also noticed that when the tda10046 is used with > tda827x it changes some other parameters in the demod (agc threshold, > gain and polarities). Do we need to change these in tda10023 also? Or > could we change tda827x to output what the tda10023 needs? Probably you want to look current Anysee TDA10023-module. I have put some of those registers configurable already. http://linuxtv.org/hg/~anttip/anysee/ regards Antti -- http://palosaari.fi/ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
