Hi ! I have an Avermedia M115 MiniPCI hybrid that worked very well (I only use DVB-T with kaffeine) using v4l-dvb-experimentral of Markus Rechberger until kernel 2.6.24. Some info about this TV tuner here : http://www.avermedia.com/cgi-bin/products_odm_M115.asp http://bttv-gallery.de/ Since kernel 2.6.24 I don't find how to make it work so I decide to give a try to the v4l-dvb tree on linuxtv.org. I followed the installation instructions here (case 2) : http://www.linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers The compilation seems to go without errors Then I followed the instructions here for the firmware (section how to obtain the firmware) : http://www.linuxtv.org/wiki/index.php/Xceive_XC3018 But kaffeine doesn't recognize the tv tuner. Here is dmesg | grep saa : saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:09:04.0, rev: 209, irq: 16, latency: 0, mmio: 0xd2005000 saa7133[0]: subsystem: 1461:a836, board: Avermedia M115 [card=138,autodetected] saa7133[0]: board init: gpio is a400000 saa7133[0]: i2c eeprom 00: 61 14 36 a8 00 00 00 00 00 00 00 00 00 00 00 00 saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 c0 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tuner' 1-0061: chip found @ 0xc2 (saa7133[0]) saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 here is dmesg | grep DVB : DVB: Unable to find symbol xc2028_attach() here is lspci -v : 09:04.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1) Subsystem: Avermedia Technologies Inc Device a836 Flags: bus master, medium devsel, latency 64, IRQ 16 Memory at d2005000 (32-bit, non-prefetchable) [size=2K] Capabilities: [40] Power Management version 2 Kernel driver in use: saa7134 Kernel modules: saa7134 I try to use it under kdetv or tvtime without success and here is what dmesg tells me : tuner' 1-0061: Tuner has no way to set tv freq Here is what I see when I look in linux/drivers/media/video/saa7134/saa7134-cards.c of v4l-dvb at linuxtv.org : 4206 [SAA7134_BOARD_AVERMEDIA_M115] = { 4207 .name = "Avermedia M115", 4208 .audio_clock = 0x187de7, 4209 .tuner_type = TUNER_XC2028, 4210 .radio_type = UNSET, 4211 .tuner_addr = ADDR_UNSET, 4212 .radio_addr = ADDR_UNSET, 4213 .inputs = {{ 4214 .name = name_tv, 4215 .vmux = 1, 4216 .amux = TV, 4217 .tv = 1, 4218 }, { 4219 .name = name_comp1, 4220 .vmux = 3, 4221 .amux = LINE1, 4222 }, { 4223 .name = name_svideo, 4224 .vmux = 8, 4225 .amux = LINE2, 4226 } }, 4227 }, And here is what I see when I look in linux/drivers/media/video/saa7134/saa7134-cards.c of v4l-dvb-experimental at mcentral.de 1709 [SAA7134_BOARD_AVERMEDIA_M115] = { 1710 .name = "Avermedia M115", 1711 .audio_clock = 0x187de7, 1712 .tuner_type = TUNER_XCEIVE_XC3028, 1713 .radio_type = UNSET, 1714 .tuner_addr = 0x61, 1715 .radio_addr = ADDR_UNSET, 1716 .mpeg = SAA7134_MPEG_DVB, 1717 .inputs = {{ 1718 .name = name_tv, 1719 .vmux = 1, 1720 .amux = TV, 1721 .tv = 1, 1722 },{ 1723 .name = name_comp1, 1724 .vmux = 3, 1725 .amux = LINE1, 1726 },{ 1727 .name = name_svideo, 1728 .vmux = 8, 1729 .amux = LINE2, 1730 }}, 1731 }, Are the differences ok ? I mean especially for the tuner type. Do I made an error during the instalation ? If no, what can I do in order to help you add the support for this card ? Thank you Luc _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
