On Apr 30, 2008, at 2:36 PM, Michael Krufky wrote:
Eric, When you use the scan command to scan for QAM channels, you must specify -a2, to signify that you are scanning digital cable. Try that -- does that work?My bad -- I meant, "-A 2" (capitol A, space, 2) -Mike
Sorry, forgot to include that I'd tried -A {1,2,3} also:
~$ scan -v -A 2 test-chan118
scanning test-chan118
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>>> tune to: 759000000:QAM_256
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
>>> tune to: 759000000:QAM_256 (tuning failed)
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
Thanks,
Eric
Attachment:
PGP.sig
Description: This is a digitally signed message part
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
