Hello,I have an HP Pavilion OEM'd HVR-1800 that I'm giving a shot at getting working (PVR-500 and HDHR are my production analog/digital inputs).
I'm running Mythbuntu 8.04 and have tried both with the bundled version of v4l-dvb modules and a hg copy from April 29, and both have the same problem:
The card is detected fine and /dev/dvb/* created. When I run 'scan us- Cable-Standard-center-frequencies-QAM256' it detects nothing, even on frequencies which I know are QAM256 from the HDHR which is 12" of coax away from the HVR-1800. Here is an example from the HDHR scan:
SCANNING: 759000000 (us-cable:118, us-irc:118) LOCK: qam256 (ss=90 snq=52 seq=100) PROGRAM: 1: 6.1 WPVI-HD PROGRAM: 2: 10.1 WCAU-DT PROGRAM: 3: 6.2 WPVI-SD PROGRAM: 4: 6.3 WPVI-WX PROGRAM: 5: 10.2 WX-PLUS and from 'scan -v test-chan118' which has just 759000000 in it: scanning test-chan118 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' >>> tune to: 759000000:QAM_256 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 WARNING: >>> tuning failed!!! >>> tune to: 759000000:QAM_256 (tuning failed) >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done.I have checked the physical connections best I can. Connecting the HVR-1800's coax to the PVR-500 sees the analog side of things fine, and the correct jack on the HVR-1800 is being used.
I'm not sure where to go from here debugging things, any suggestions or more data I can provide? The modprobe-produced info from dmesg is at the end of this message.
Thanks, Eric [67182.599444] cx23885 driver version 0.0.1 loaded[67182.599631] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [67182.599870] CORE cx23885[0]: subsystem: 0070:7801, board: Hauppauge WinTV-HVR1800 [card=2,autodetected]
[67182.762076] cx23885[0]: i2c bus 0 registered [67182.764615] tuner' 2-0042: chip found @ 0x84 (cx23885[0])[67182.799857] tda829x 2-0042: could not clearly identify tuner address, defaulting to 60
[67182.823174] tda18271 2-0060: creating new instance [67182.859178] TDA18271HD/C1 detected @ 2-0060 [67184.029322] tda829x 2-0042: type set to tda8295+18271 [67185.226752] cx23885[0]: i2c bus 1 registered [67185.229777] msp3400' 3-0044: MSP5431H-^8 found @ 0x88 (cx23885[0])[67185.229782] msp3400' 3-0044: MSP5431H-^8 supports radio, mode is autodetect and autoselect
[67185.229980] cx23885[0]: i2c bus 2 registered[67185.257210] tveeprom 1-0050: Hauppauge model 78521, rev C1E9, serial# 2639463
[67185.257214] tveeprom 1-0050: MAC address is 00-0D-FE-28-46-67[67185.257217] tveeprom 1-0050: tuner model is Philips 18271_8295 (idx 149, type 54) [67185.257220] tveeprom 1-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
[67185.257223] tveeprom 1-0050: audio processor is CX23887 (idx 42) [67185.257226] tveeprom 1-0050: decoder processor is CX23887 (idx 37)[67185.257228] tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter
[67185.257231] cx23885[0]: hauppauge eeprom: model=78521 [67185.343514] cx23885[0]/0: registered device video1 [v4l2] [67186.513413] cx23885[0]: registered device video2 [mpeg] [67186.513419] cx23885[0]: cx23885 based dvb card [67186.544894] MT2131: successfully identified at address 0x61 [67186.544901] DVB: registering new adapter (cx23885[0])[67186.544905] DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
[67186.546383] cx23885_dev_checkrevision() Hardware revision = 0xb1[67186.546396] cx23885[0]/0: found at 0000:02:00.0, rev: 15, irq: 17, latency: 0, mmio: 0xf9e00000
[67186.546407] PCI: Setting latency timer of device 0000:02:00.0 to 64
Attachment:
PGP.sig
Description: This is a digitally signed message part
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
