On 080426 at 21:40, Markus Rechberger wrote: > you might try > > hg clone http://mcentral.de/hg/~mrec/em28xx-new > > this is a full inkernel driver. To resolve dependencies, I manually compiled and copied the drivers in the subdirectories, too. The driver seems to load okay, but I'm unable to scan channels: | root@# scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Ruhrgebiet > .tzap/channels.conf | | scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Ruhrgebiet | using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' | initial transponder 538000000 0 2 9 1 1 3 0 | initial transponder 586000000 0 2 9 1 1 3 0 | initial transponder 722000000 0 2 9 1 1 3 0 | initial transponder 746000000 0 2 9 1 1 3 0 | initial transponder 690000000 0 2 9 1 1 3 0 | initial transponder 506000000 0 2 9 1 1 2 0 | initial transponder 674000000 0 2 9 1 1 3 0 | initial transponder 778000000 0 2 9 1 1 2 0 | >>> tune to: 538000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE | WARNING: >>> tuning failed!!! | >>> tune to: 538000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed) | WARNING: >>> tuning failed!!! channels.conf is empty. dmesg: | Linux video capture interface: v2.00 | em28xx v4l2 driver version 0.0.1 loaded | em28xx new video device (0ccd:0042): interface 0, class 255 | em28xx: device is attached to a USB 2.0 bus | em28xx #0: Alternate settings: 8 | em28xx #0: Alternate setting 0, max size= 0 | em28xx #0: Alternate setting 1, max size= 0 | em28xx #0: Alternate setting 2, max size= 1448 | em28xx #0: Alternate setting 3, max size= 2048 | em28xx #0: Alternate setting 4, max size= 2304 | em28xx #0: Alternate setting 5, max size= 2580 | em28xx #0: Alternate setting 6, max size= 2892 | em28xx #0: Alternate setting 7, max size= 3072 | input: em2880/em2870 remote control as /devices/virtual/input/input20 | em28xx-input.c: remote control handler attached | manual gpio | ------ on off command ----- | writing gpio: 08 ff | manual gpio | ------ on off command ----- | writing gpio: 08 ff | manual gpio | ------ on off command ----- | writing gpio: 08 fb | manual gpio | ------ on off command ----- | writing gpio: 08 7b | manual gpio | ------ on off command ----- | writing gpio: 08 79 | manual gpio | ------ on off command ----- | writing gpio: 08 79 | manual gpio | ------ on off command ----- | writing gpio: 04 04 | manual gpio | trying to set disabled gpio? (00) | unable to attach tuner | em28xx #0: V4L2 VBI device registered as /dev/vbi0 | em28xx #0: V4L2 device registered as /dev/video0 | em28xx #0: Found Terratec Hybrid XS | em28xx audio device (0ccd:0042): interface 1, class 1 | em28xx audio device (0ccd:0042): interface 2, class 1 | usbcore: registered new interface driver em28xx | em2880-dvb.c: DVB Init | manual gpio | ------ on off command ----- | writing gpio: 08 7b | ts1 on | manual gpio | ------ on off command ----- | writing gpio: 08 7a | tuner on | manual gpio | ------ on off command ----- | writing gpio: 08 7a | demod reset | manual gpio | ------ resetting --------- | writing gpio: 04 04 | writing gpio: 04 0c | DVB: registering new adapter (em2880 DVB-T) | DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... | Em28xx: Initialized (Em2880 DVB Extension) extension | manual gpio | ------ on off command ----- | writing gpio: 08 7a | manual gpio | ------ on off command ----- | writing gpio: 08 7a | manual gpio | ------ on off command ----- | writing gpio: 08 7a -- # (o_ # +49/1781384223 //\-x gpg --recv-key A04D7875 V_/_ Use the source, Tux! mailto: pepe@xxxxxxxxxxxxxx _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
