Re: crash with terratec cinergy hybrid XS [0ccd:0042]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/26/08, Steffen Schulz <pepe_ml@xxxxxxx> wrote:
> Hi,
>
>
> The mailman on mcentral.de seems to be dead, so I'll ask here.
>

it's temporary offline due a server move, archives are available though.

>
> I installed userspace-drivers and em28xx-userspace2 with a  2.6.24.4
> kernel with mactel-linux patches(some macbook specific drivers).
>
> I needed to activate some dvb-support to get the drivers compile
> cleanly, e.g. v4l1-compat, IIRC.
>
> When I plug in the device, em28xx.ko is loaded and the usb subsystem
> kind of crashes. Internal and external keyboards(both attached via USB)
> do not work anymore, but mouse+touchpad works. When media-daemon is
> enabled, I get this with dmesg(USB freezes without media-daemon, too):
>
> | usb 6-2: new high speed USB device using ehci_hcd and address 3
> | usb 6-2: configuration #1 chosen from 1 choice
> | em28xx v4l2 driver version 0.0.1 loaded
> | em28xx new video device (0ccd:0042): interface 0, class 255
> | em28xx: device is attached to a USB 2.0 bus
> | em28xx #0: Alternate settings: 8
> | em28xx #0: Alternate setting 0, max size= 0
> | em28xx #0: Alternate setting 1, max size= 0
> | em28xx #0: Alternate setting 2, max size= 1448
> | em28xx #0: Alternate setting 3, max size= 2048
> | em28xx #0: Alternate setting 4, max size= 2304
> | em28xx #0: Alternate setting 5, max size= 2580
> | em28xx #0: Alternate setting 6, max size= 2892
> | em28xx #0: Alternate setting 7, max size= 3072
> | input: em2880/em2870 remote control as /devices/virtual/input/input15
> | em28xx-input.c: remote control handler attached
> | moduleid: 0
> | media-stub: adding support for Texas Instruments - tvp5150
> | media-stub: userspace driver version 1
> | media-stub: Copyright: Mauro Chehab
> | em28xx: registered module_id 1
> | media-stub: adding support for Texas Instruments - tvp5150
> | media-stub: userspace driver version 1
> | media-stub: Copyright: Mauro Chehab
> | em28xx #0: V4L2 VBI device registered as /dev/vbi0
> | media-daemon[2457]: segfault at 0000000c eip b7fc418e esp bfb82080 error 6
> | removing support for Texas Instruments - tvp5150
>

you might try

hg clone http://mcentral.de/hg/~mrec/em28xx-new

this is a full inkernel driver.

Markus

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux