Hi, On 4/25/08, Joe Ammann <joe@xxxxxx> wrote: > Hi everybody > > I'm trying to get this device (USB 2040:6502) going. I understand that this > version will probably not give me DVB (only an older release would be > supported). But at the moment, I can't get anything to work, not even > analogue or the remote control. > > Currently, I'm trying on Fedora 8 with a vanilla 2.6.24.5 kernel and the > drivers from http://linuxtv.org/hg/v4l-dvb. I also tried with the FC8 stock > kernel, 2.6.25, the drivers from mcentral.de, and even the userspace drivers > from Markus Rechberger, following various howto's and instructions. > > For most combinations, I can achieve the following: > - analogue device is recognized and configured (according to > dmesg, firmware is loaded, /dev/video0 appears) > - can't tune anything (with kdetv, device and cable are probably ok, because > it works in Windows) > - IR remote is not recognized (nothing shows up in /proc/bus/input/devices) > > With the userspace drivers from mcentral.de on 2.6.25, I got analogue and > DVB > recognized and devices installed, but again couldn't tune anything (with > kdetv and klear). > > Before I try to investigate deeper, I thought I'd ask again if my > expectations > are right ?!? I *should* be able to get analogue and IR remote working, > shouldn't I? > > I'd be thankful for any hints, pointing me to the most promising > combination :-) , and willing to post logs and stuff. > could you post the dmesg output? Markus _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
