On Sunday 20 April 2008, Faruk A wrote: > > Could you please try to change line 1547 in stb0899_algo.c to: > > > > offsetfreq = ((((offsetfreq / 1024) * 1000) / (1<<7)) * (s32)(internal->master_clk/1000000)) / (s32)(1<<13); > > > > this should use only 32bit ops and not over/underflow for the expected ranges ;) > > > > > > Dominik > > It works, with this new changes i had no problem loading the drivers. > > One more thing i did some testing with vdr and dvbs2 it looks like it > locks in exactly after 1 minute > but no video or audio vdr just displays no signal. I don't know if is > the vdrs fault or the drivers > anyway i have attached a small log. (no attachment rejected by > moderator, I've sent copy of this mail to Dominik with attachment. > Tried pastebin too didn't help) Hmm, i have received your log file (its 3MB, you could try to bzip2 it before attaching. usually log files compress well) The log starts at 19:51:19 with opening the device. but it looks like delivery system is set to DVB-S not DVB-S2 frequency and symbolrate would match the astra-hd channel (1314MHz and 27500kSym/s). then at 19:52:20 the frontend parameter were changed to 1479MHz and 24500kSym/s not sure what triggered the retuning. after 5 seconds the FE locks, which is surprising since the symbolrate is not correct. > > The dvb-s2 channel is ASTRA HD+ on ASTRA 19E > vdr version is 1.6.0 with Reinhard Nissl's DVB-S2 + H.264 patch hmm, I'm not familiar with vdr but afaik this should be ok. Dominik
Attachment:
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
