Hello, Try http://linuxtv.org/hg/~stoth/v4l-dvb/rev/67b7ef217867 this patch ... Had the same problem on my Ubuntu Hardy box. Seems like its HAL thats messing up with some things. If u stop HAL, reload modules, it prolly works. But just use the patch, then u can use HAL also :) Sincerely, Jean-Louis Dupond Peter Weiss schreef: > Hello, > > running a 2.6.24.3 kernel with a Hauppauge WinTV-HVR 1300 card on a > debian etch system results in lots of errors, but no video and no > sound when using analog DVB. I've tested some other kernels such as a > self compiled 2.6.21.5 and a 2.6.21.4-1-486 one that comes with the > distribution with the same results. > > The card works out of the box with an ubuntu system running > 2.6.22-14-generic. > > Any ideas?? > > > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x00, val == 0x02, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x00, val == 0x00, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x0b, val == 0x06, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x09, val == 0x01, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x0d, val == 0x41, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x16, val == 0x32, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x20, val == 0x0a, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x21, val == 0x17, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x24, val == 0x3e, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x26, val == 0xff, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x27, val == 0x10, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x28, val == 0x00, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x29, val == 0x00, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x2a, val == 0x10, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x2b, val == 0x00, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x2c, val == 0x10, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x2d, val == 0x00, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x48, val == 0xd4, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x49, val == 0x56, ret == -121) > Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg == > 0x6b, val == 0x1e, ret == -121) > > # uname -r > 2.6.24.3pichuco > > > lspci shows the card as: > > # lspci -vv -s 03:02.0 > 03:02.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video > and Audio Decoder (rev 05) > Subsystem: Hauppauge computer works Inc. Unknown device 9601 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 21 > Region 0: Memory at ed000000 (32-bit, non-prefetchable) [size=16M] > Capabilities: [44] Vital Product Data <?> > Capabilities: [4c] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: cx8800 > Kernel modules: cx8800 > > dmesg shows no errors or failures detecting the card: > > [...] > cx88/0: cx2388x v4l2 driver version 0.0.6 loaded > cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded > intel_rng: FWH not detected > cx2388x alsa driver version 0.0.6 loaded > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19 > cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 > DVB-T/Hybrid MPEG Encoder [card=56,autodetected] > cx88[0]: TV tuner type 63, Radio tuner type -1 > tveeprom 1-0050: Hauppauge model 96019, rev D6D3, serial# 1697990 > tveeprom 1-0050: MAC address is 00-0D-FE-19-E8-C6 > tveeprom 1-0050: tuner model is Philips FMD1216MEX (idx 133, type 4) > tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) > ATSC/DVB Digital (eeprom 0xf4) > tveeprom 1-0050: audio processor is CX882 (idx 33) > tveeprom 1-0050: decoder processor is CX882 (idx 25) > tveeprom 1-0050: has radio, has IR receiver, has IR transmitter > cx88[0]: hauppauge eeprom: model=96019 > cx88[0]/2: cx2388x 8802 Driver Manager > ACPI: PCI Interrupt 0000:03:02.2[A] -> GSI 22 (level, low) -> IRQ 21 > cx88[0]/2: found at 0000:03:02.2, rev: 5, irq: 21, latency: 32, mmio: > 0xef000000 > ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1f.5 to 64 > cx88/2: cx2388x dvb driver version 0.0.6 loaded > cx88/2: registering cx8802 driver, type: dvb access: shared > cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 > DVB-T/Hybrid MPEG Encoder [card=56] > cx88[0]/2: cx2388x based DVB/ATSC card > DVB: registering new adapter (cx88[0]) > DVB: registering frontend 0 (Conexant CX22702 DVB-T)... > intel8x0_measure_ac97_clock: measured 57816 usecs > intel8x0: clocking to 48000 > ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 22 (level, low) -> IRQ 21 > cx88[0]/0: found at 0000:03:02.0, rev: 5, irq: 21, latency: 32, mmio: > 0xed000000 > cx88[0]/0: registered device video0 [v4l2] > cx88[0]/0: registered device vbi0 > cx88[0]/0: registered device radio0 > [...] > > > Modules are loaded successfully: > > # lsmod | egrep 'dvb|tv|cx|video' > cx88_blackbird 19076 0 > firmware_class 9344 1 cx88_blackbird > cx2341x 11652 1 cx88_blackbird > dvb_pll 11912 1 > cx22702 5892 1 > cx88_dvb 12804 0 > cx88_vp3054_i2c 3200 1 cx88_dvb > videobuf_dvb 6788 1 cx88_dvb > dvb_core 73700 1 videobuf_dvb > cx88_alsa 12680 1 > snd_pcm 77572 5 cx88_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss > cx8802 17796 2 cx88_blackbird,cx88_dvb > snd 53908 16 > cx88_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device > cx8800 32624 1 cx88_blackbird > cx88xx 62248 5 cx88_blackbird,cx88_dvb,cx88_alsa,cx8802,cx8800 > ir_common 35204 1 cx88xx > i2c_algo_bit 6148 2 cx88_vp3054_i2c,cx88xx > tveeprom 14992 1 cx88xx > videodev 26240 3 cx88_blackbird,cx8800,cx88xx > v4l1_compat 12420 1 videodev > compat_ioctl32 1536 1 cx8800 > v4l2_common 16768 5 cx88_blackbird,cx2341x,cx8800,cx88xx,videodev > videobuf_dma_sg 13572 7 > cx88_blackbird,cx88_dvb,videobuf_dvb,cx88_alsa,cx8802,cx8800,cx88xx > videobuf_core 16900 6 > cx88_blackbird,videobuf_dvb,cx8802,cx8800,cx88xx,videobuf_dma_sg > btcx_risc 5000 4 cx88_alsa,cx8802,cx8800,cx88xx > i2c_core 22400 7 > dvb_pll,cx22702,cx88_vp3054_i2c,cx88xx,i2c_algo_bit,tveeprom,i2c_i801 > > > # modinfo cx88_dvb > filename: > /lib/modules/2.6.24.3pichuco/kernel/drivers/media/video/cx88/cx88-dvb.ko > license: GPL > author: Gerd Knorr <kraxel@xxxxxxxxxxx> [SuSE Labs] > author: Chris Pascoe <c.pascoe@xxxxxxxxxxxxxx> > description: driver for cx2388x based DVB cards > srcversion: 72B9CE062973ED4E9DE9599 > depends: cx8802,videobuf-dvb,cx88xx,videobuf-dma-sg,cx88-vp3054-i2c > vermagic: 2.6.24.3pichuco SMP mod_unload PENTIUM4 > parm: debug:enable debug messages [dvb] (int) > > > TIA -- Peter > > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
