Hello, running a 2.6.24.3 kernel with a Hauppauge WinTV-HVR 1300 card on adebian etch system results in lots of errors, but no video and nosound when using analog DVB. I've tested some other kernels such as aself compiled 2.6.21.5 and a 2.6.21.4-1-486 one that comes with thedistribution with the same results. The card works out of the box with an ubuntu system running2.6.22-14-generic. Any ideas?? Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x00, val == 0x02, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x00, val == 0x00, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x0b, val == 0x06, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x09, val == 0x01, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x0d, val == 0x41, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x16, val == 0x32, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x20, val == 0x0a, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x21, val == 0x17, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x24, val == 0x3e, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x26, val == 0xff, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x27, val == 0x10, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x28, val == 0x00, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x29, val == 0x00, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x2a, val == 0x10, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x2b, val == 0x00, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x2c, val == 0x10, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x2d, val == 0x00, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x48, val == 0xd4, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x49, val == 0x56, ret == -121)Apr 16 08:44:05 Pichuco kernel: cx22702_writereg: writereg error (reg ==0x6b, val == 0x1e, ret == -121) # uname -r2.6.24.3pichuco lspci shows the card as: # lspci -vv -s 03:02.003:02.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Videoand Audio Decoder (rev 05) Subsystem: Hauppauge computer works Inc. Unknown device 9601Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21Region 0: Memory at ed000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: cx8800 Kernel modules: cx8800 dmesg shows no errors or failures detecting the card: [...]cx88/0: cx2388x v4l2 driver version 0.0.6 loadedcx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loadedintel_rng: FWH not detectedcx2388x alsa driver version 0.0.6 loadedACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300DVB-T/Hybrid MPEG Encoder [card=56,autodetected]cx88[0]: TV tuner type 63, Radio tuner type -1tveeprom 1-0050: Hauppauge model 96019, rev D6D3, serial# 1697990tveeprom 1-0050: MAC address is 00-0D-FE-19-E8-C6tveeprom 1-0050: tuner model is Philips FMD1216MEX (idx 133, type 4)tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)ATSC/DVB Digital (eeprom 0xf4)tveeprom 1-0050: audio processor is CX882 (idx 33)tveeprom 1-0050: decoder processor is CX882 (idx 25)tveeprom 1-0050: has radio, has IR receiver, has IR transmittercx88[0]: hauppauge eeprom: model=96019cx88[0]/2: cx2388x 8802 Driver ManagerACPI: PCI Interrupt 0000:03:02.2[A] -> GSI 22 (level, low) -> IRQ 21cx88[0]/2: found at 0000:03:02.2, rev: 5, irq: 21, latency: 32, mmio:0xef000000ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 18PCI: Setting latency timer of device 0000:00:1f.5 to 64cx88/2: cx2388x dvb driver version 0.0.6 loadedcx88/2: registering cx8802 driver, type: dvb access: sharedcx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300DVB-T/Hybrid MPEG Encoder [card=56]cx88[0]/2: cx2388x based DVB/ATSC cardDVB: registering new adapter (cx88[0])DVB: registering frontend 0 (Conexant CX22702 DVB-T)...intel8x0_measure_ac97_clock: measured 57816 usecsintel8x0: clocking to 48000ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 22 (level, low) -> IRQ 21cx88[0]/0: found at 0000:03:02.0, rev: 5, irq: 21, latency: 32, mmio:0xed000000cx88[0]/0: registered device video0 [v4l2]cx88[0]/0: registered device vbi0cx88[0]/0: registered device radio0[...] Modules are loaded successfully: # lsmod | egrep 'dvb|tv|cx|video'cx88_blackbird 19076 0 firmware_class 9344 1 cx88_blackbirdcx2341x 11652 1 cx88_blackbirddvb_pll 11912 1 cx22702 5892 1 cx88_dvb 12804 0 cx88_vp3054_i2c 3200 1 cx88_dvbvideobuf_dvb 6788 1 cx88_dvbdvb_core 73700 1 videobuf_dvbcx88_alsa 12680 1 snd_pcm 77572 5 cx88_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_osscx8802 17796 2 cx88_blackbird,cx88_dvbsnd 53908 16cx88_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_devicecx8800 32624 1 cx88_blackbirdcx88xx 62248 5 cx88_blackbird,cx88_dvb,cx88_alsa,cx8802,cx8800ir_common 35204 1 cx88xxi2c_algo_bit 6148 2 cx88_vp3054_i2c,cx88xxtveeprom 14992 1 cx88xxvideodev 26240 3 cx88_blackbird,cx8800,cx88xxv4l1_compat 12420 1 videodevcompat_ioctl32 1536 1 cx8800v4l2_common 16768 5 cx88_blackbird,cx2341x,cx8800,cx88xx,videodevvideobuf_dma_sg 13572 7cx88_blackbird,cx88_dvb,videobuf_dvb,cx88_alsa,cx8802,cx8800,cx88xxvideobuf_core 16900 6cx88_blackbird,videobuf_dvb,cx8802,cx8800,cx88xx,videobuf_dma_sgbtcx_risc 5000 4 cx88_alsa,cx8802,cx8800,cx88xxi2c_core 22400 7dvb_pll,cx22702,cx88_vp3054_i2c,cx88xx,i2c_algo_bit,tveeprom,i2c_i801 # modinfo cx88_dvbfilename:/lib/modules/2.6.24.3pichuco/kernel/drivers/media/video/cx88/cx88-dvb.kolicense: GPLauthor: Gerd Knorr <kraxel@xxxxxxxxxxx> [SuSE Labs]author: Chris Pascoe <c.pascoe@xxxxxxxxxxxxxx>description: driver for cx2388x based DVB cardssrcversion: 72B9CE062973ED4E9DE9599depends: cx8802,videobuf-dvb,cx88xx,videobuf-dma-sg,cx88-vp3054-i2cvermagic: 2.6.24.3pichuco SMP mod_unload PENTIUM4 parm: debug:enable debug messages [dvb] (int) TIA -- Peter -- Peter.Weiss@xxxxxxxxx ConSol* Software GmbHPhone +49 89 45841-100 Consulting & SolutionsMobile +49 177 6040121 Franziskanerstr. 38http://www.consol.de D-81669 München _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
