Frederic MASSOT a écrit : > Hi, > > There is still one week, I was watching TV (DVB-T) on my PC with > Kaffeine without problems. My PC uses a Debian Etch, last weekend I do > an update to Etch (final), then Lenny, since everything works except the > TV. Strange !? > > I use a DVB-T card ASUSTeK P7131 Dual, and I use a custom Linux kernel > 2.6.24 with DVB support. I kept the same kernel (2.6.24) before and > after the upgrade. > > - The card is well recognized by the kernel, dmesg output: > > saa7133[0]: found at 0000:05:03.0, rev: 209, irq: 16, latency: 64, mmio: > 0xff7ff000 > saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid > [card=112,autodetected] > saa7133[0]: board init: gpio is 0 > input: saa7134 IR (ASUSTeK P7131 Hybri as /class/input/input4 > saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 > saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff > saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff > saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > tuner 1-004b: chip found @ 0x96 (saa7133[0]) > tda8290 1-004b: setting tuner address to 61 > tuner 1-004b: type set to tda8290+75a > tda8290 1-004b: setting tuner address to 61 > tuner 1-004b: type set to tda8290+75a > saa7133[0]: registered device video0 [v4l2] > saa7133[0]: registered device vbi0 > saa7133[0]: registered device radio0 > DVB: registering new adapter (saa7133[0]) > DVB: registering frontend 0 (Philips TDA10046H DVB-T)... > tda1004x: setting up plls for 48MHz sampling clock > tda1004x: timeout waiting for DSP ready > tda1004x: found firmware revision 0 -- invalid > tda1004x: trying to boot from eeprom > tda1004x: timeout waiting for DSP ready > tda1004x: found firmware revision 0 -- invalid > tda1004x: waiting for firmware upload... > tda1004x: found firmware revision 29 -- ok > saa7134 ALSA driver for DMA sound loaded > saa7133[0]/alsa: saa7133[0] at 0xff7ff000 irq 16 registered as card -1 > > > - Devices : > $ ls -l /dev/dvb/adapter0/ > crw-rw---- 1 root video 212, 4 avr 11 19:55 demux0 > crw-rw---- 1 root video 212, 5 avr 11 19:55 dvr0 > crw-rw---- 1 root video 212, 3 avr 11 19:55 frontend0 > crw-rw---- 1 root video 212, 7 avr 11 19:55 net0 > > > - I use the file fr-Vannes, when I scan, I have these messages : > > $ sudo scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Vannes > scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Vannes > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > initial transponder 674167000 0 2 9 3 1 0 0 > initial transponder 698167000 0 2 9 3 1 0 0 > initial transponder 762167000 0 2 9 3 1 0 0 > initial transponder 778167000 0 2 9 3 1 0 0 > initial transponder 818167000 0 2 9 3 1 0 0 >>>> tune to: > 674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > WARNING: filter timeout pid 0x0502 > WARNING: filter timeout pid 0x0504 > WARNING: filter timeout pid 0x050a > WARNING: filter timeout pid 0x0500 > WARNING: filter timeout pid 0x0011 > WARNING: filter timeout pid 0x0503 > WARNING: filter timeout pid 0x0506 > WARNING: filter timeout pid 0x0505 > WARNING: filter timeout pid 0x0010 >>>> tune to: > 698167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > WARNING: filter timeout pid 0x0011 > WARNING: filter timeout pid 0x0000 > WARNING: filter timeout pid 0x0010 >>>> tune to: > 762167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > WARNING: filter timeout pid 0x0011 > WARNING: filter timeout pid 0x0000 > WARNING: filter timeout pid 0x0010 >>>> tune to: > 778167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > WARNING: filter timeout pid 0x0011 > WARNING: filter timeout pid 0x0000 > WARNING: filter timeout pid 0x0010 >>>> tune to: > 818167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > WARNING: filter timeout pid 0x0011 > WARNING: filter timeout pid 0x0000 > WARNING: filter timeout pid 0x0010 > dumping lists (7 services) > [0201]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:513 > [0207]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:519 > [02ff]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:767 > [0206]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:518 > [0205]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:517 > [0204]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:516 > [0203]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:515 > Done. > > > > I have no error messages in the log, it's one week that I seek, I do not > understand what is no longer working. Hi, You do not see where the problem is coming? On the same weekend that the upgrade, I have new neighbors who are installed, it may be an antenna problem? Regards. -- ============================================== | FRÉDÉRIC MASSOT | | http://www.juliana-multimedia.com | | mailto:frederic@xxxxxxxxxxxxxxxxxxxxxx | ===========================Debian=GNU/Linux=== _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
