Hi, There is still one week, I was watching TV (DVB-T) on my PC with Kaffeine without problems. My PC uses a Debian Etch, last weekend I do an update to Etch (final), then Lenny, since everything works except the TV. Strange !? I use a DVB-T card ASUSTeK P7131 Dual, and I use a custom Linux kernel 2.6.24 with DVB support. I kept the same kernel (2.6.24) before and after the upgrade. - The card is well recognized by the kernel, dmesg output: saa7133[0]: found at 0000:05:03.0, rev: 209, irq: 16, latency: 64, mmio: 0xff7ff000 saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid [card=112,autodetected] saa7133[0]: board init: gpio is 0 input: saa7134 IR (ASUSTeK P7131 Hybri as /class/input/input4 saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tuner 1-004b: chip found @ 0x96 (saa7133[0]) tda8290 1-004b: setting tuner address to 61 tuner 1-004b: type set to tda8290+75a tda8290 1-004b: setting tuner address to 61 tuner 1-004b: type set to tda8290+75a saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: timeout waiting for DSP ready tda1004x: found firmware revision 0 -- invalid tda1004x: trying to boot from eeprom tda1004x: timeout waiting for DSP ready tda1004x: found firmware revision 0 -- invalid tda1004x: waiting for firmware upload... tda1004x: found firmware revision 29 -- ok saa7134 ALSA driver for DMA sound loaded saa7133[0]/alsa: saa7133[0] at 0xff7ff000 irq 16 registered as card -1 - Devices : $ ls -l /dev/dvb/adapter0/ crw-rw---- 1 root video 212, 4 avr 11 19:55 demux0 crw-rw---- 1 root video 212, 5 avr 11 19:55 dvr0 crw-rw---- 1 root video 212, 3 avr 11 19:55 frontend0 crw-rw---- 1 root video 212, 7 avr 11 19:55 net0 - I use the file fr-Vannes, when I scan, I have these messages : $ sudo scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Vannes scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Vannes using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 674167000 0 2 9 3 1 0 0 initial transponder 698167000 0 2 9 3 1 0 0 initial transponder 762167000 0 2 9 3 1 0 0 initial transponder 778167000 0 2 9 3 1 0 0 initial transponder 818167000 0 2 9 3 1 0 0 >>> tune to: 674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: filter timeout pid 0x0502 WARNING: filter timeout pid 0x0504 WARNING: filter timeout pid 0x050a WARNING: filter timeout pid 0x0500 WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0503 WARNING: filter timeout pid 0x0506 WARNING: filter timeout pid 0x0505 WARNING: filter timeout pid 0x0010 >>> tune to: 698167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 >>> tune to: 762167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 >>> tune to: 778167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 >>> tune to: 818167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 dumping lists (7 services) [0201]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:513 [0207]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:519 [02ff]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:767 [0206]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:518 [0205]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:517 [0204]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:516 [0203]:674167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:515 Done. I have no error messages in the log, it's one week that I seek, I do not understand what is no longer working. Regards. -- ============================================== | FRÉDÉRIC MASSOT | | http://www.juliana-multimedia.com | | mailto:frederic@xxxxxxxxxxxxxxxxxxxxxx | ===========================Debian=GNU/Linux=== _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
