Add zl10313 support to mt312 driver.
zl10313 uses 10.111MHz xtal.
Signed-off-by: Matthias Schwarzott <zzam@xxxxxxxxxx>
Index: v4l-dvb/linux/drivers/media/dvb/frontends/mt312.c
===================================================================
--- v4l-dvb.orig/linux/drivers/media/dvb/frontends/mt312.c
+++ v4l-dvb/linux/drivers/media/dvb/frontends/mt312.c
@@ -1,7 +1,8 @@
/*
- Driver for Zarlink VP310/MT312 Satellite Channel Decoder
+ Driver for Zarlink VP310/MT312/ZL10313 Satellite Channel Decoder
Copyright (C) 2003 Andreas Oberritter <obi@xxxxxxxxxxx>
+ Copyright (C) 2008 Matthias Schwarzott <zzam@xxxxxxxxxx>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -55,6 +56,7 @@ static int debug;
} while (0)
#define MT312_PLL_CLK 10000000UL /* 10 MHz */
+#define MT312_PLL_CLK_10_111 10111000UL /* 10.111 MHz */
static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg,
u8 *buf, const size_t count)
@@ -264,6 +266,32 @@ static int mt312_initfe(struct dvb_front
return ret;
}
+ switch (state->id) {
+ case ID_ZL10313:
+ /* enable ADC */
+ ret = mt312_writereg(state, GPP_CTRL, 0x80);
+ if (ret < 0)
+ return ret;
+
+ /* configure ZL10313 for optimal ADC performance */
+ buf[0] = 0x80;
+ buf[1] = 0xB0;
+ ret = mt312_write(state, HW_CTRL, buf, 2);
+ if (ret < 0)
+ return ret;
+
+ /* enable MPEG output and ADCs */
+ ret = mt312_writereg(state, HW_CTRL, 0x00);
+ if (ret < 0)
+ return ret;
+
+ ret = mt312_writereg(state, MPEG_CTRL, 0x00);
+ if (ret < 0)
+ return ret;
+
+ break;
+ }
+
/* SYS_CLK */
buf[0] = mt312_div(state->xtal * state->freq_mult * 2, 1000000);
@@ -278,7 +306,17 @@ static int mt312_initfe(struct dvb_front
if (ret < 0)
return ret;
- ret = mt312_writereg(state, OP_CTRL, 0x53);
+ /* different MOCLK polarity */
+ switch (state->id) {
+ case ID_ZL10313:
+ buf[0] = 0x33;
+ break;
+ default:
+ buf[0] = 0x53;
+ break;
+ }
+
+ ret = mt312_writereg(state, OP_CTRL, buf[0]);
if (ret < 0)
return ret;
@@ -552,6 +590,7 @@ static int mt312_set_frontend(struct dvb
break;
case ID_MT312:
+ case ID_ZL10313:
break;
default:
@@ -617,11 +656,29 @@ static int mt312_i2c_gate_ctrl(struct dv
{
struct mt312_state *state = fe->demodulator_priv;
- if (enable) {
- return mt312_writereg(state, GPP_CTRL, 0x40);
- } else {
- return mt312_writereg(state, GPP_CTRL, 0x00);
+ u8 val = 0x00;
+ int ret;
+
+ switch (state->id) {
+ case ID_ZL10313:
+ ret = mt312_readreg(state, GPP_CTRL, &val);
+ if (ret < 0)
+ goto error;
+
+ /* preserve this bit to not accidently shutdown ADC */
+ val &= 0x80;
+ break;
}
+
+ if (enable)
+ val |= 0x40;
+ else
+ val &= ~0x40;
+
+ ret = mt312_writereg(state, GPP_CTRL, val);
+
+error:
+ return ret;
}
static int mt312_sleep(struct dvb_frontend *fe)
@@ -635,6 +692,18 @@ static int mt312_sleep(struct dvb_fronte
if (ret < 0)
return ret;
+ if (state->id == ID_ZL10313) {
+ /* reset ADC */
+ ret = mt312_writereg(state, GPP_CTRL, 0x00);
+ if (ret < 0)
+ return ret;
+
+ /* full shutdown of ADCs, mpeg bus tristated */
+ ret = mt312_writereg(state, HW_CTRL, 0x0d);
+ if (ret < 0)
+ return ret;
+ }
+
ret = mt312_readreg(state, CONFIG, &config);
if (ret < 0)
return ret;
@@ -736,8 +805,13 @@ struct dvb_frontend *vp310_mt312_attach(
state->xtal = MT312_PLL_CLK;
state->freq_mult = 6;
break;
+ case ID_ZL10313:
+ strcpy(state->frontend.ops.info.name, "Zarlink ZL10313 DVB-S");
+ state->xtal = MT312_PLL_CLK_10_111;
+ state->freq_mult = 9;
+ break;
default:
- printk(KERN_WARNING "Only Zarlink VP310/MT312"
+ printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313"
" are supported chips.\n");
goto error;
}
@@ -753,7 +827,7 @@ EXPORT_SYMBOL(vp310_mt312_attach);
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-MODULE_DESCRIPTION("Zarlink VP310/MT312 DVB-S Demodulator driver");
+MODULE_DESCRIPTION("Zarlink VP310/MT312/ZL10313 DVB-S Demodulator driver");
MODULE_AUTHOR("Andreas Oberritter <obi@xxxxxxxxxxx>");
MODULE_LICENSE("GPL");
Index: v4l-dvb/linux/drivers/media/dvb/frontends/mt312_priv.h
===================================================================
--- v4l-dvb.orig/linux/drivers/media/dvb/frontends/mt312_priv.h
+++ v4l-dvb/linux/drivers/media/dvb/frontends/mt312_priv.h
@@ -110,6 +110,8 @@ enum mt312_reg_addr {
VIT_ERRPER_H = 83,
VIT_ERRPER_M = 84,
VIT_ERRPER_L = 85,
+ HW_CTRL = 84, /* ZL10313 only */
+ MPEG_CTRL = 85, /* ZL10313 only */
VIT_SETUP = 86,
VIT_REF0 = 87,
VIT_REF1 = 88,
@@ -156,7 +158,8 @@ enum mt312_reg_addr {
enum mt312_model_id {
ID_VP310 = 1,
- ID_MT312 = 3
+ ID_MT312 = 3,
+ ID_ZL10313 = 5,
};
#endif /* DVB_FRONTENDS_MT312_PRIV */
--
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
