Hello people, It works! [ 2515.625003] usb 1-4: new high speed USB device using ehci_hcd and address 7 [ 2515.762432] usb 1-4: configuration #1 chosen from 1 choice [ 2515.762854] af9015_usb_probe: interface:0 [ 2515.763154] af9015_identify_state: reply:02 [ 2515.763159] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state. [ 2515.763235] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 2515.763561] DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick) [ 2515.763932] af9015_eeprom_dump: [ 2515.787389] 00: 2c 47 97 0b 00 00 00 00 a4 15 16 90 00 02 01 02 [ 2515.809721] 10: 03 80 00 fa fa 10 40 ef 01 30 31 30 31 30 38 32 [ 2515.831951] 20: 30 30 37 30 30 32 42 43 ff ff ff ff ff ff ff ff [ 2515.854813] 30: 00 00 3a 01 00 08 02 00 1d 8d c4 04 82 ff ff ff [ 2515.877532] 40: ff ff ff ff ff 08 02 00 1d 8d c4 04 82 ff ff ff [ 2515.900010] 50: ff ff ff ff ff 24 00 00 04 03 09 04 10 03 41 00 [ 2515.922493] 60: 66 00 61 00 74 00 65 00 63 00 68 00 0c 03 44 00 [ 2515.944449] 70: 56 00 42 00 2d 00 54 00 20 03 30 00 31 00 30 00 [ 2515.966674] 80: 31 00 30 00 31 00 30 00 31 00 30 00 36 00 30 00 [ 2515.988649] 90: 30 00 30 00 30 00 31 00 00 ff ff ff ff ff ff ff [ 2516.010645] a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2516.032603] b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2516.054705] c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2516.076805] d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2516.098905] e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2516.120881] f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 2516.122259] af9015_read_config: xtal:2 set adc_clock:28000 [ 2516.125003] af9015_read_config: IF1:36125 [ 2516.127750] af9015_read_config: MT2060 IF1:1220 [ 2516.129132] af9015_read_config: tuner id1:130 [ 2516.130499] af9015_read_config: spectral inversion:0 [ 2516.147737] af9013: firmware version:4.95.0 [ 2516.147760] DVB: registering frontend 0 (Afatech AF9013 DVB-T)... [ 2516.147861] af9015_tuner_attach: [ 2516.147866] af9015_set_gpio: gpio:3 gpioval:03 [ 2516.169484] MT2060: successfully identified (IF1 = 1220) [ 2516.635455] dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected. [ 2516.635464] af9015_init: [ 2516.635467] af9015_init_endpoint: USB speed:3 [ 2516.639572] af9015_download_ir_table: [ 2516.689738] input: Afatech DVB-T as /class/input/input10 [ 2516.689930] input: USB HID v1.01 Keyboard [Afatech DVB-T] on usb-0000:00:10.4-4 [ 2559.501813] af9015_pid_filter_ctrl: onoff:0 My Hauppauge WinTV Nova-T USB2 stick does still not work, but I am pretty happy though. I finally got something to work. :P Regards, Janus On Mon, Apr 7, 2008 at 8:47 PM, Antti Palosaari <crope@xxxxxx> wrote: > thanx for feedback > I am just working for PID-filter support (USB1.1 support) and hope that in > few hours it is ready. This is first time I am adding PID-filter so it is > little bit learning also. > > /antti > > > > Benoit Paquin wrote: > > > Antti, > > > > You new driver is working! I can not copy the linux-dvb list as I am not a > member yet (I need to enroll). > > Good work! > > If you want me to test a USB 1.1 version, I will be glad to do so. I have > a neat Lex-light machine (no fan, Via C3 cpu) running Ubuntu! > > > > Thanks, > > Benoit > > > > Janus: Can you check the new driver if you have time? I did: > > hg clone http://linuxtv.org/hg/~anttip/af9015/ > > cd af9015 > > make > > sudo make install > > (add the line dvb-usb-af9015 in /etc/modules) > > reboot > > plug stick > > check dmesg > > > > If you are in Copenhagen, Kanal-Kbh has a strong signal that the mini > antenna can take: > > dvbstream -f 586000 -o -ps 4001 4002 >test.mpg > > mplayer test.mpg > > > > > > > -- > http://palosaari.fi/ > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
