HI, Christoph Honermann schrieb: > Hi, Hartmund > > > Hartmut Hackmann schrieb: >> Hi, Christoph >> >> Christoph Honermann schrieb: >> >>> Hi, Hartmund >>> >>> I have tested the following archives with my MD8800 und the DVB-S Card. >>> >>> v4l-dvb-912856e2a0ce.tar.bz2 --> The DVB-S Input 1 works. >>> The module of the following archives are loaded with the option >>> "use_frontend=1,1" at the Shell or automatically: >>> /etc/modprobe.d/saa7134-dvb with the following line >>> "options saa7134-dvb use_frontend=1,1" >>> v4l-dvb-1e295a94038e.tar.bz2; >>> >>> FATAL: Error inserting saa7134_dvb >>> (/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko): >>> Unknown symbol in module, or unknown parameter (see dmesg) >>> >>> saa7134_dvb: disagrees about version of symbol saa7134_ts_register >>> saa7134_dvb: Unknown symbol saa7134_ts_register >>> saa7134_dvb: Unknown symbol videobuf_queue_sg_init >>> saa7134_dvb: disagrees about version of symbol saa7134_set_gpio >>> saa7134_dvb: Unknown symbol saa7134_set_gpio >>> saa7134_dvb: disagrees about version of symbol saa7134_i2c_call_client >>> saa7134_dvb: Unknown symbol saa7134_i2c_call_clients >>> saa7134_dvb: disagrees about version of symbol saa7134_ts_unregister >>> saa7134_dvb: Unknown symbol saa7134_ts_unregister >>> >>> >>> v4l-dvb-f98d28c21389.tar.bz2 and v4l-dvb-a06ac2bdeb3c.tar.bz2 --> >>> >>> FATAL: Error inserting saa7134_dvb >>> (/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko): >>> Unknown symbol in module, or unknown parameter (see dmesg) >>> >>> dmesg | grep saa7134 >>> saa7134_dvb: Unknown symbol saa7134_tuner_callback >>> saa7134_dvb: disagrees about version of symbol saa7134_ts_register >>> saa7134_dvb: Unknown symbol saa7134_ts_register >>> saa7134_dvb: Unknown symbol videobuf_queue_sg_init >>> saa7134_dvb: disagrees about version of symbol saa7134_set_gpio >>> saa7134_dvb: Unknown symbol saa7134_set_gpio >>> >>> The Hardware ist working with Windows XP with both Input channels. >>> >>> >> This occurs when you mix modules of different driver versions. You need to >> replace all modules of the v4l-dvb subsystem. >> So after you compiled and installed with >> make; make install >> you need to unload all modules of the subsystem either with >> make rmmod >> or reboot. >> Afterwards, you can unload and reload a single module as you tried to do. >> >> Hartmut >> >> > the second DVB-S Channel is working. > But there is one thing that makes Problems. > I have the effect that the devices /dev/dvb/adapter0/dvr0 and > /dev/dvb/adapter1/dvr0 are missed from kaffeine. Therefore it wont work > (no TV-picture, no sound, no channel scanning). > If i look with Nautilus (file manager) therefore the whole Section > /dev/dvb is switching off. > Can that be an effect of the module? > The Problem is sometimes not there but i don't find the reason (changing > the Modules, reboots, ..). If I solve the Problem, should I test the > kombination between DVB-S and DVB-T? > > Best regards > Christoph > > The device files in /dev/dvb are created by the dvb subsystem after successful initialization. So if module loading fails as you describe above, you won't have the devices. Your problem still is the mismatching module versions. Could it be that you have the saa7134.ko module twice in the /lib/modules tree? You need to use the new versions of the modules. *Don't* try to mix them. Best Regards Hartmut _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
