Hi, Hartmund
Hartmut Hackmann schrieb:
Hi, Christoph
Christoph Honermann schrieb:
Hi, Hartmund
I have tested the following archives with my MD8800 und the DVB-S Card.
v4l-dvb-912856e2a0ce.tar.bz2 --> The DVB-S Input 1 works.
The module of the following archives are loaded with the option
"use_frontend=1,1" at the Shell or automatically:
/etc/modprobe.d/saa7134-dvb with the following line
"options saa7134-dvb use_frontend=1,1"
v4l-dvb-1e295a94038e.tar.bz2;
FATAL: Error inserting saa7134_dvb
(/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
saa7134_dvb: disagrees about version of symbol saa7134_ts_register
saa7134_dvb: Unknown symbol saa7134_ts_register
saa7134_dvb: Unknown symbol videobuf_queue_sg_init
saa7134_dvb: disagrees about version of symbol saa7134_set_gpio
saa7134_dvb: Unknown symbol saa7134_set_gpio
saa7134_dvb: disagrees about version of symbol saa7134_i2c_call_client
saa7134_dvb: Unknown symbol saa7134_i2c_call_clients
saa7134_dvb: disagrees about version of symbol saa7134_ts_unregister
saa7134_dvb: Unknown symbol saa7134_ts_unregister
v4l-dvb-f98d28c21389.tar.bz2 and v4l-dvb-a06ac2bdeb3c.tar.bz2 -->
FATAL: Error inserting saa7134_dvb
(/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
dmesg | grep saa7134
saa7134_dvb: Unknown symbol saa7134_tuner_callback
saa7134_dvb: disagrees about version of symbol saa7134_ts_register
saa7134_dvb: Unknown symbol saa7134_ts_register
saa7134_dvb: Unknown symbol videobuf_queue_sg_init
saa7134_dvb: disagrees about version of symbol saa7134_set_gpio
saa7134_dvb: Unknown symbol saa7134_set_gpio
The Hardware ist working with Windows XP with both Input channels.
This occurs when you mix modules of different driver versions. You need to
replace all modules of the v4l-dvb subsystem.
So after you compiled and installed with
make; make install
you need to unload all modules of the subsystem either with
make rmmod
or reboot.
Afterwards, you can unload and reload a single module as you tried to do.
Hartmut
the second DVB-S Channel is working.
But there is one thing that makes Problems.
I have the effect that the devices /dev/dvb/adapter0/dvr0 and
/dev/dvb/adapter1/dvr0 are missed from kaffeine. Therefore it wont
work (no TV-picture, no sound, no channel scanning).
If i look with Nautilus (file manager) therefore the whole Section
/dev/dvb is switching off.
Can that be an effect of the module?
The Problem is sometimes not there but i don't find the reason
(changing the Modules, reboots, ..). If I solve the Problem, should I
test the kombination between DVB-S and DVB-T?
Best regards
Christoph
|
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
