Am Freitag, den 04.04.2008, 01:14 +0200 schrieb cherOKe:> El jue, 03-04-2008 a las 22:14 +0200, hermann pitton escribió:> > Hi,> > > > Am Donnerstag, den 03.04.2008, 02:31 +0200 schrieb cherOKe:> > > Hi, it's my first timer here, i'm cheroke from spain. > > > > > > I,ve trying to istall y lifeview trio several times with no good> > > results, the only that I've made works it's analog tv without sound :(.> > > > for devices without analog sound out you need a helper application like> > "sox -c 2 -s -w -r 32000 -t ossdsp /dev/dsp1 -t ossdsp -w -r 48000 /dev/dsp"> > to get the sound from here assumed saa7134-alsa device /dev/dsp1 to your sound card.> > > > Only mplayer and mencoder support this directly from the saa7134-alsa dsp with immediatemode=0.> > > > Sample commands could look like.> > > > /usr/local/bin/mplayer -v tv:// -vf pp=lb -tv driver=v4l2:norm=PAL:input=0:alsa:adevice=hw.1,0:forceaudio:immediatemode=0:audiorate=32000:amode=1:width=640:height=480:outfmt=yuy2:device=/dev/video0:chanlist=europe-west:channel=E9> > > > /usr/local/bin/mencoder -v tv:// -tv driver=v4l2:device=/dev/video0:width=640:height=480:chanlist=europe-west:alsa:adevice=hw.1,0:audiorate=32000:amode=1:forceaudio:volume=95:immediatemode=0:norm=PAL -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=3600 -vf pp=lb -oac mp3lame -lameopts cbr:br=128:mode=0 -o mytest.avi> ...............> > > > OK, I assume you have a recent v4l-dvb master copy now.> > > ...............> > On older kernels, like 2.6.20, a simple "make" does not make all it> > seems, also "make allmodconfig" doesn't work. You get all bttv, cx88,> > saa7134 related and others not built. This might be the case here.> > > > This results in a mixture of incompatible old and new modules after> > "make install".> > > > Try "make distclean" and then "make xconfig" and enable all missing> > modules, also go through dvb and check that the related frontends> > tda10045/46 and tda10086 and the isl6421 are ready, see it with> > customize dvb froontends. In short enable all you can and if possible> > always as modules. Then "make".> > > > If installing first time on an older kernel, try to make sure you have > > really all older *.ko removed from /lib/modules/uname -r/kernel/drivers/media> > > > With "make rmmod" you might not be able to unload all modules and might> > try to get the rest with "modprobe -vr" or must reboot later.> > > > Do "make rminstall", this should remove all *.ko from the media folder,> > but check with "ls -R |grep .ko" there and remove/delete any remaining> > module. Do "make install". Reboot if there are any related modules still> > loaded.> > > > If you want to test DVB-S, it is best to put> > "options saa7134-dvb use_frontend=1" in /etc/modprobe.conf or what your> > distribution uses else for module options and "depmod -a".> > > > Also put "options saa7134 card=84 latency=64" something there to avoid> > card=0 on boot, but from now on everything else should work too.> > > > If it should have a remote, support is not in tree, if it has radio> > support, please test. Please report, that we might be able to add it to> > auto detection. We have one previous report for now and that cardbus> > version was functional so far.> > > > Happy testing,> > > > Hermann> > > Hi, > Thanks you for responding, i'll try to digest all the information yo give me, and testing.> I'll report results as soon i have.> I'm using Ubuntu 8.04 (development branch) kernel2.6.24-12-generic. Hi, yes, that is true. Had a first look 24 hours back and missed the 2.6.24 now, but thepattern should still be valid for _all_ supported kernels, but 2.6.24 isnot exactly in question ;) You have some nice module mess anyway. Cheers,Hermann _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
