Hi. I'm running the http://www.jusst.de/hg/mantis code from mars 19 on a 2.6.22 kernel and can't get any reception on my AD-CP300. I find it a little strange that both tda10021 and 10023 are loaded by the mantis module. Is that ok? I would really appreciate any help on this. /Magnus H scan .czap/se-comhem scanning .czap/se-comhem using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 362000000 6875000 0 3 >>> tune to: 362000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 WARNING: >>> tuning failed!!! >>> tune to: 362000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. lsmod: mantis 33284 0 tda10021 7940 1 mantis tda10023 7428 1 mantis lnbp21 3328 1 mantis mb86a16 21632 1 mantis stb6100 8964 1 mantis stb0899 36480 1 mantis stv0299 11528 1 mantis dvb_core 89500 2 mantis,stv0299 i2c_core 26112 11 mantis,tda10021,tda10023,it87,i2c_isa,lnbp21,mb86a16,stb6100,stb0899,stv0299,i2c_nforce2 dmesg: [ 289.330023] found a VP-2033 PCI DVB-C device on (01:09.0), [ 289.330025] Mantis Rev 1 [1822:0008], irq: 21, latency: 32 [ 289.330028] memory: 0xe4100000, mmio: 0xf894e000 [ 289.332717] MAC Address=[00:08:ca:1c:2d:b3] [ 289.332747] mantis_alloc_buffers (0): DMA=0x1fbc0000 cpu=0xdfbc0000 size=65536 [ 289.332778] mantis_alloc_buffers (0): RISC=0x1fded000 cpu=0xdfded000 size=1000 [ 289.332804] DVB: registering new adapter (Mantis dvb adapter) [ 289.849341] mantis_frontend_init (0): Probing for CU1216 (DVB-C) [ 289.850762] TDA10021: i2c-addr = 0x0c, id = 0x7d [ 289.850765] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend (TDA10021) @ 0x0c [ 289.850791] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success [ 289.850819] DVB: registering frontend 0 (Philips TDA10021 DVB-C)... lspci -vvv -s 01:09 01:09.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01) Subsystem: Twinhan Technology Co. Ltd Unknown device 0008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 63750ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at e4100000 (32-bit, prefetchable) [size=4K] lspci -vvn -s 01:09 01:09.0 0480: 1822:4e35 (rev 01) Subsystem: 1822:0008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 63750ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at e4100000 (32-bit, prefetchable) [size=4K] _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
