Hello,
with a KNC One "TV-Station DVB-C Plus" PCI card (MK3 - Philips SAA7146
with CU1216L/A I G H-3 Tunerbox with TDA10023) equipped with composite
and s-video inputs ('Plus' version, Philips SAA7113), analog capture
is not working. Most recent kernel sources I tested were 2.6.25-rc7.
DVB-C television works fine with this card using 'budget_av' kernel
module (from kernel 2.6.20 on, using e9hack's tda1002x patch, and
later with mainstream kernel sources alone), but when opening an
analog input, there are no data coming. A black screen is shown with
'xawtv' application. Xawtv correctly shows up the two video sources
this card provides: 'S-Video' and 'Composite'.
I checked the cables and video sources, they work fine with another
card with analog input.
I can do tests or compile something if you want me to. Information from
lspci, dmesg and lsmod please see below. Help to get analog capture
working is appreciated very much.
Thank you
L.
'lspci -nn' and 'lspci -vv' show:
00:14.0 Multimedia controller [0480]: Philips Semiconductors SAA7146 [1131:7146] (rev 01)
00:14.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: KNC One Unknown device 0023
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 7
Region 0: Memory at de00d000 (32-bit, non-prefetchable) [size=512]
Note: Subsystem ID 1894:0023 is a KNC One TV-Station DVB-C Plus (MK3)
dmesg shows:
[...]
Linux video capture interface: v2.00
saa7146: register extension 'budget_av'.
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
saa7146: found saa7146 @ mem de984000 (revision 1, irq 7) (0x1894,0x0023).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (KNC1 DVB-C Plus MK3).
adapter failed MAC signature check
encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
KNC1-0: MAC addr = [...]
DVB: registering frontend 0 (Philips TDA10023 DVB-C)...
budget-av: ci interface initialised.
[...]
'lsmod' shows:
[...]
tda10023 6500 1
budget_av 20000 1
dvb_pll 14308 1 budget_av
saa7146_vv 48672 2 budget_av
video_buf 24388 1 saa7146_vv
videodev 27104 2 saa7146_vv
v4l2_common 24096 2 saa7146_vv,videodev
v4l1_compat 14340 2 saa7146_vv,videodev
firmware_class 9568 2 pcmcia,budget_av
budget_core 10980 1 budget_av
dvb_core 78024 2 budget_av,budget_core
saa7146 18408 3 budget_av,saa7146_vv,budget_core
ttpci_eeprom 2368 1 budget_core
[...]
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
