According to this forum post: http://www.dvbviewer.info/forum/index.php?showtopic=24366 The card uses the tda10023 demod (for which there is a driver in the sources) and a tda8274A tuner (which the tda827x driver hopefully will handle). So all that should be needed is some glue code. Sigmund tor, 20.03.2008 kl. 12.56 +0100, skrev dlist2@xxxxxxx: > Hi, > > I just purchased a Technotrend Budget C-1501. > Im running Mythbuntu Beta, and downloaded the latest v4l drivers but it > still fails. > > lspci -v > > 05:04.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) > Subsystem: Technotrend Systemtechnik GmbH Unknown device 101a > Flags: bus master, medium devsel, latency 66, IRQ 5 > Memory at fc501000 (32-bit, non-prefetchable) [size=512] > > lspci -n > > 05:04.0 0480: 1131:7146 (rev 01) > Subsystem: 13c2:101a > Flags: bus master, medium devsel, latency 66, IRQ 5 > Memory at fc501000 (32-bit, non-prefetchable) [size=512] > > log says > > kernel: [ 54.207308] Linux video capture interface: v2.00 > kernel: [ 54.501753] saa7146: register extension 'dvb'. > runvdr: stopping after fatal fail (vdr: warning - cannot set dumpable: Invalid argument vdr: no primary device found - using > first device!) > > And /dev/dvb is empty of course. > Im not a kernel hacker, but if you have any hits on how to get this card > working please let me know. > > Thanks > > Daniel > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
