OK, my Terratec Cinergy HT Express now works with dvb-linux. I managed to apply the patch by Hans-Frieder and Albert. Thanks for your work! Additionally, I added my card's description to dvb-usb-ids.h and dib0700_devices.c . (Should I post the files?) I read the website before I posted my first email, but screwed up applying the patch correctly. Now I started all over to compare and include the new parts into today's development snapshot and it works. I could scan channels and (using MPlayer) tune and even had audio working. I was not sure about the xc3028 firmware, since my card's windows driver does not contain any emBDA.sys but only a XC3028.rom which looks different. Anyhow I did not try to extract any firmware myself. I just took an existing xc3028-v27.fw and copied it into /lib/firmware. I am not even sure it is loaded, but it works. Could someone please add the my card together with the Pinnacle 320cx and Terratec Cinergy HT USB XE to the dvb-linux development tree and the wiki? Thanks, Felix Quoting Albert Comerma <albert.comerma@xxxxxxxxx>: > To make dvb-t working (not analog), please have a look at my page; > http://www.comerma.net/pinnacle320cx_en.html > It should work for you just adding your device descriptor to > dvb-usb-ids.hand your card at dib0700_devices.c, I would try first to > use the same > frontend attach as other cinergy usb cards. If you think it's to complicated > I can try to add it for you, tomorrow. Please let me know. > > Albert > > 2008/3/17, Felix Apitzsch <f.apitzsch@xxxxxxxxxxxxxxxxxxxx>: >> >> Im am trying to get my Terratec Cinergy HT Express to work with v4l-dvb. >> >> It's a DVB-T/analog hybrid (+radio) ExpressCard 34, but it connects >> via the usb interface, not the pci-e interface. To confirm what I >> reckoned, I openend the device to find the following: >> >> DiBcom 7700C1-ACXXa-G QH0T8 D2PRJ.1 0646-1100-C >> >> XCEIVE XC3028 AK47465,2 0620TWE3 >> >> CONEXANT CX25843-24Z 61024448 0625 KOREA >> >> (I took some photos if someone is interested) >> >> The usd-id is 0ccd:0060 . >> >> For now, I would be happy to live with just DVB-T support. >> As far as I understand the status quo, it should be possible to get >> the card running, isn't it? >> >> I would need some help to get the xc3028 part compiled and running and >> add it to dib0700_devices.c and dvb-usb-ids.h with the right config >> for the DIB770C1+XC3028. Additionally, I would need some assistance >> with the firmware xc3028. The dib0700 firmeware should be ok. >> >> Also, I had some trouble when I tried to get the xc3028 frontend code >> compiled. It is not in v4l_experimental anymore, is it? Where did it >> go and how do I include it? >> >> Could anyone do a patch for me and pack me a .bz2, so I can do some >> testing? >> >> I am running a kernel 2.6.24 on a x86_64 (~amd64) gentoo system with >> current v4l-dvb-hg from portage. >> >> Felix >> >> _______________________________________________ >> linux-dvb mailing list >> linux-dvb@xxxxxxxxxxx >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >> > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
