On Mon, Mar 17, 2008 at 5:31 AM, Jonny B <jon.the.wise.gdrive@xxxxxxxxx> wrote:
Here is my dmesg:
Linux version 2.6.22.17-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fe40000 (usable)
BIOS-e820: 000000003fe40000 - 000000003fe50000 (ACPI data)
BIOS-e820: 000000003fe50000 - 000000003ff00000 (ACPI NVS)
126MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 261696) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 261696
early_node_map[1] active PFN ranges
0: 0 -> 261696
On node 0 totalpages: 261696
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 252 pages used for memmap
HighMem zone: 32068 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F7300, 0014 (r0 ACPIAM)
ACPI: RSDT 3FE40000, 0030 (r1 INTEL D845GBV 20030714 MSFT 97)
ACPI: FACP 3FE40200, 0081 (r2 INTEL D845GBV 20030714 MSFT 97)
ACPI: DSDT 3FE40370, 3FD7 (r1 INTEL D845GBV 10A MSFT 100000D)
ACPI: FACS 3FE50000, 0040
ACPI: APIC 3FE40300, 0068 (r1 INTEL D845GBV 20030714 MSFT 97)
ACPI: ASF! 3FE44350, 0084 (r16 AMIASF I845GASF 1 MSFT 100000D)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3ff00000:c0100000)
Built 1 zonelists. Total pages: 259652
Kernel command line: root=/dev/disk/by-id/scsi-SATA_IC35L060AVV207-_VNVB20G2GMVG5R-part3 vga=0x317 resume=/dev/sda2 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2400.175 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1029456k/1046784k available (1829k kernel code, 16512k reserved, 764k data, 228k init, 129280k highmem)
virtual kernel memory layout:
fixmap : 0xffdf4000 - 0xfffff000 (2092 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0390000 - 0xc03c9000 ( 228 kB)
.data : 0xc02c95cb - 0xc0388964 ( 764 kB)
.text : 0xc0100000 - 0xc02c95cb (1829 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4804.51 BogoMIPS (lpj=9609036)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Unpacking initramfs... done
Freeing initrd memory: 4045k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 592 Objects with 46 Devices 164 Methods 21 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
CPU0: Intel(R) Pentium(R) 4 Family CPU 2.40GHz stepping 04
Total of 1 processors activated (4804.51 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:............................................................................................................
Initialized 18/21 Regions 29/29 Fields 47/47 Buffers 14/14 Packages (601 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 0 _STA executions (examined 50 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: RTC can wake from S4
pnp: 00:09: ioport range 0x400-0x47f has been reserved
pnp: 00:09: ioport range 0x680-0x6ff has been reserved
pnp: 00:09: ioport range 0x480-0x4bf has been reserved
pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:0a: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0a: iomem range 0xc0000-0xdffff could not be reserved
pnp: 00:0a: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0a: iomem range 0x100000-0x3fefffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: f8900000-fe9fffff
PREFETCH window: e0700000-e07fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1205683425.392:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Switched to NOHz mode on CPU #0
floppy0: no floppy controllers found
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 228k freed
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126]
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.11
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
ata1.00: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
ata1.00: 78165360 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2.00: ATA-6: WDC WD2000JB-00DUA0, 63.13F63, max UDMA/100
ata2.00: 390721968 sectors, multi 16: LBA48
ata2.01: ATA-5: MAXTOR 6L080J4, A93.0500, max UDMA/133
ata2.01: 156355584 sectors, multi 16: LBA
ata2.00: configured for UDMA/100
ata2.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA WDC WD2000JB-00D 63.1 PQ: 0 ANSI: 5
scsi 1:0:1:0: Direct-Access ATA MAXTOR 6L080J4 A93. PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000e800
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e880
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000ec00
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 1:0:1:0: [sdc] 156355584 512-byte hardware sectors (80054 MB)
sd 1:0:1:0: [sdc] Write Protect is off
sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:1:0: [sdc] 156355584 512-byte hardware sectors (80054 MB)
sd 1:0:1:0: [sdc] Write Protect is off
sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc:<6>usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sdc1
sd 1:0:1:0: [sdc] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfeb7fc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: new device found, idVendor=04cc, idProduct=1122
usb 3-1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-1: configuration #1 chosen from 1 choice
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 5 ports detected
usb 3-1.1: new full speed USB device using uhci_hcd and address 3
usb 3-1.1: new device found, idVendor=05ac, idProduct=1002
usb 3-1.1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.1: Product: Hub in Apple Extended USB Keyboard
usb 3-1.1: Manufacturer: Mitsumi Electric
usb 3-1.1: configuration #1 chosen from 1 choice
hub 3-1.1:1.0: USB hub found
hub 3-1.1:1.0: 3 ports detected
usb 3-1.2: new low speed USB device using uhci_hcd and address 4
usb 3-1.2: new device found, idVendor=045e, idProduct=0040
usb 3-1.2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.2: Product: Microsoft Wheel Mouse Optical�
usb 3-1.2: Manufacturer: Microsoft
usb 3-1.2: configuration #1 chosen from 1 choice
usb 3-1.5: new full speed USB device using uhci_hcd and address 5
usb 3-1.5: new device found, idVendor=0403, idProduct=8401
usb 3-1.5: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.5: Product: PS/2 Keyboard And Mouse I/F
usb 3-1.5: Manufacturer: FTDI
usb 3-1.5: configuration #1 chosen from 1 choice
usb 3-1.1.1: new full speed USB device using uhci_hcd and address 6
usb 3-1.1.1: new device found, idVendor=05ac, idProduct=0204
usb 3-1.1.1: new device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-1.1.1: Product: Apple Extended USB Keyboard
usb 3-1.1.1: Manufacturer: Mitsumi Electric
usb 3-1.1.1: configuration #1 chosen from 1 choice
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:1:0: Attached scsi generic sg2 type 0
usbcore: registered new interface driver hiddev
input: Microsoft Microsoft Wheel Mouse Optical� as /class/input/input1
input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical�] on usb-0000:00:1d.2-1.2
input: FTDI PS/2 Keyboard And Mouse I/F as /class/input/input2
input: USB HID v1.00 Keyboard [FTDI PS/2 Keyboard And Mouse I/F] on usb-0000:00:1d.2-1.5
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 830M Chipset.
agpgart: Detected 892K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
you are certain that your <4>intel_rng: system has a functional
RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
iTCO_vendor_support: vendor-support=0
i810_smbus 0000:00:02.0: i810/i815 i2c device found.
I810/I815 I2C Adapter: SDA stuck high!
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:02 failed with error -16
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Linux video capture interface: v2.00
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
cx2388x alsa driver version 0.0.6 loaded
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
intel8x0_measure_ac97_clock: measured 54929 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:01:00.1[A] -> GSI 21 (level, low) -> IRQ 21
cx88[0]: subsystem: 11bd:0051, board: Pinnacle PCTV HD 800i [card=58,autodetected]
cx88[0]: TV tuner type 76, Radio tuner type -1
cx88[0]: Test OK
tuner' 1-0064: chip found @ 0xc8 (cx88[0])
xc5000: Successfully identified at address 0x64
xc5000: Firmware has not been loaded previously
xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)...
xc5000: firmware read 12332 bytes.
xc5000: firmware upload
cx88[0]: Calling XC5000 callback
input: FTDI PS/2 Keyboard And Mouse I/F as /class/input/input5
input: USB HID v1.00 Mouse [FTDI PS/2 Keyboard And Mouse I/F] on usb-0000:00:1d.2-1.5
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input6
input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.2-1.1.1
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input7
input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.2-1.1.1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
input: cx88 IR (Pinnacle PCTV HD 800i) as /class/input/input8
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 22
e100: eth0: e100_probe: addr 0xfe9ff000, irq 22, MAC addr 00:07:E9:AD:BB:07
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:01:00.2[A] -> GSI 21 (level, low) -> IRQ 21
cx88[0]/2: found at 0000:01:00.2, rev: 5, irq: 21, latency: 32, mmio: 0xfd000000
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 21
cx88[0]/0: found at 0000:01:00.0, rev: 5, irq: 21, latency: 32, mmio: 0xfb000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 11bd:0051, board: Pinnacle PCTV HD 800i [card=58]
cx88[0]/2: cx2388x based DVB/ATSC card
xc5000: Successfully identified at address 0x64
xc5000: Firmware has been loaded previously
DVB: registering new adapter (cx88[0])
DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
Adding 1574360k swap on /dev/sda2. Priority:-1 extents:1 across:1574360k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sda4
Ending clean XFS mount for filesystem: sda4
XFS mounting filesystem sdb1
Ending clean XFS mount for filesystem: sdb1
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
powernow: This module only works with AMD K7 CPUs
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[drm] Initialized i915 1.6.0 20060119 on minor 0
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
IA-32 Microcode Update Driver: v1.14a <tigran@xxxxxxxxxxxxxxxxxxxx>
usb 3-1.5: reset full speed USB device using uhci_hcd and address 5
usb 3-1.5: reset full speed USB device using uhci_hcd and address 5
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
01:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
01:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
01:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
01:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (LOM) Ethernet Controller (rev 81)
and my lspci:
2008/3/16 Mark A Jenks <Mark.Jenks@xxxxxxxxxxxxx>:_______________________________________________Not sure what is happening here. I'm about to rebuild the box again and see if it works before I install everything that I did to it.Here is what I have so far..Thoughts? I was thinking sensors (k8temp, it87), but I removed them, and it stil happens.-Mark--------------------------->>> tune to: 509028615:8VSB
WARNING: >>> tuning failed!!!
>>> tune to: 509028615:8VSB (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 515028615:8VSB
service is running. Channel number: 14:1. Name: 'WIWB-HD·'mythtv:~ # dmesgCORE cx23885[0]: subsystem: 0070:7911, board: Hauppauge WinTV-HVR1250 [card=3,autodetected]
cx23885[0]: i2c bus 0 registered
cx23885[0]: i2c bus 1 registered
cx23885[0]: i2c bus 2 registered
tveeprom 2-0050: Encountered bad packet header [ff]. Corrupt or not a Hauppauge eeprom.
cx23885[0]: warning: unknown hauppauge model #0
cx23885[0]: hauppauge eeprom: model=0
cx23885[0]: cx23885 based dvb card
MT2131: successfully identified at address 0x61
DVB: registering new adapter (cx23885[0])
DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
cx23885_dev_checkrevision() Hardware revision = 0xc0
cx23885[0]/0: found at 0000:02:00.0, rev: 3, irq: 21, latency: 0, mmio: 0xfd600000
BUG: unable to handle kernel paging request at virtual address fd7fffff
printing eip:
c01090bd
*pde = 00000000
Oops: 0000 [#1]
SMP
last sysfs file: /devices/pci0000:00/0000:00:18.3/name
Modules linked in: snd_pcm_oss snd_mixer_oss snd_seq_midi snd_seq_midi_event snd_seq iptable_filter ip_tables ip6_tables x_tables xfs loop dm_mod mt2131 s5h1409 osst ohci1394 cx23885 nvidia(P) ieee1394 videodev v4l1_compat compat_ioctl32 v4l2_common st button rtc_cmos snd_hda_intel rtc_core snd_pcm snd_timer snd_mpu401 forcedeth rtc_lib btcx_risc tveeprom videobuf_dvb dvb_core videobuf_dma_sg agpgart snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore hwmon videobuf_core snd_page_alloc parport_pc lirc_imon(F) parport sr_mod cdrom i2c_nforce2 i2c_core lirc_dev sg sd_mod ehci_hcd ohci_hcd usbcore edd ext3 mbcache jbd fan aic7xxx scsi_transport_spi sata_nv pata_amd libata scsi_mod thermal processor
CPU: 0
EIP: 0060:[<c01090bd>] Tainted: PF N VLI
EFLAGS: 00010286 (2.6.22.17-0.1-default #1)
EIP is at dma_free_coherent+0x22/0x53
eax: 00000000 ebx: ebcab000 ecx: fd7fffff edx: 000001d4
esi: 00000000 edi: f305422c ebp: f746d1e0 esp: ebc77f60
ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068
Process cx23885[0] dvb (pid: 4290, ti=ebc76000 task=f600f570 task.ti=ebc76000)
Stack: dfe01c90 dfe01c48 f9178416 2bcab000 f918a358 ffffffea f30541c0 f3054248
f746d128 f92a1dcd f746d128 00000000 00000282 f914a414 f746d128 00000000
ebc8be80 f914a504 f746d128 f746d120 f914a58b ebc8bea4 f915f3e7 c011dfa6
Call Trace:
[<f9178416>] btcx_riscmem_free+0x58/0x68 [btcx_risc]
[<f918a358>] videobuf_dma_unmap+0x43/0x58 [videobuf_dma_sg]
[<f92a1dcd>] cx23885_free_buffer+0x4a/0x55 [cx23885]
[<f914a414>] videobuf_queue_cancel+0x72/0x8e [videobuf_core]
[<f914a504>] __videobuf_read_stop+0xb/0x53 [videobuf_core]
[<f914a58b>] videobuf_read_stop+0xf/0x17 [videobuf_core]
[<f915f3e7>] videobuf_dvb_thread+0xec/0x12f [videobuf_dvb]
[<c011dfa6>] complete+0x39/0x48
[<f915f2fb>] videobuf_dvb_thread+0x0/0x12f [videobuf_dvb]
[<c01350ee>] kthread+0x38/0x5e
[<c01350b6>] kthread+0x0/0x5e
[<c0106117>] kernel_thread_helper+0x7/0x10
=======================
Code: d8 5b e9 eb 44 06 00 5b c3 56 53 89 cb 31 c9 85 c0 74 06 8b 88 40 01 00 00 8d 42 ff 83 ce ff c1 e8 0b 46 d1 e8 75 fb 85 c9 74 26 <8b> 11 39 d3 72 20 8b 41 08 c1 e0 0c 8d 04 02 39 c3 73 13 29 d3
EIP: [<c01090bd>] dma_free_coherent+0x22/0x53 SS:ESP 0068:ebc77f60mythtv:~ # lsmod
Module Size Used by
snd_pcm_oss 50432 0
snd_mixer_oss 20096 1 snd_pcm_oss
snd_seq_midi 13440 0
snd_seq_midi_event 10880 1 snd_seq_midi
snd_seq 54452 2 snd_seq_midi,snd_seq_midi_event
iptable_filter 6912 0
ip_tables 16324 1 iptable_filter
ip6_tables 17476 0
x_tables 18308 2 ip_tables,ip6_tables
xfs 502932 1
loop 21636 0
dm_mod 56880 3
mt2131 9732 1
s5h1409 12548 1
osst 54172 0
ohci1394 36272 0
cx23885 66644 2
nvidia 7846932 26
ieee1394 91136 1 ohci1394
videodev 35584 1 cx23885
v4l1_compat 16388 1 videodev
compat_ioctl32 5376 1 cx23885
v4l2_common 14976 1 cx23885
st 40092 0
button 12560 0
rtc_cmos 12064 0
snd_hda_intel 273180 3
rtc_core 23048 1 rtc_cmos
snd_pcm 82564 3 snd_pcm_oss,snd_hda_intel
snd_timer 26756 2 snd_seq,snd_pcm
snd_mpu401 12684 0
forcedeth 50056 0
rtc_lib 7040 1 rtc_core
btcx_risc 8712 1 cx23885
tveeprom 15748 1 cx23885
videobuf_dvb 10628 1 cx23885
dvb_core 76548 1 videobuf_dvb
videobuf_dma_sg 17028 2 cx23885,videobuf_dvb
agpgart 35764 1 nvidia
snd_mpu401_uart 12416 1 snd_mpu401
snd_rawmidi 28416 2 snd_seq_midi,snd_mpu401_uart
snd_seq_device 12172 3 snd_seq_midi,snd_seq,snd_rawmidi
snd 58164 16 snd_pcm_oss,snd_mixer_oss,snd_seq_midi,snd_seq,snd_hda_intel,snd_pcm,snd_timer,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 11460 1 snd
hwmon 7300 0
videobuf_core 21380 3 cx23885,videobuf_dvb,videobuf_dma_sg
snd_page_alloc 14472 2 snd_hda_intel,snd_pcm
parport_pc 40892 0
lirc_imon 19976 1
parport 37832 1 parport_pc
sr_mod 19492 0
cdrom 37020 1 sr_mod
i2c_nforce2 9856 0
i2c_core 27520 7 mt2131,s5h1409,cx23885,nvidia,v4l2_common,tveeprom,i2c_nforce2
lirc_dev 18264 1 lirc_imon
sg 37036 0
sd_mod 31104 7
ehci_hcd 35340 0
ohci_hcd 23684 0
usbcore 124268 5 lirc_imon,ehci_hcd,ohci_hcd
edd 12996 0
ext3 131848 4
mbcache 12292 1 ext3
jbd 68148 1 ext3
fan 9220 0
aic7xxx 157348 0
scsi_transport_spi 27008 1 aic7xxx
sata_nv 22664 6
pata_amd 16644 0
libata 139216 2 sata_nv,pata_amd
scsi_mod 140376 8 osst,st,sr_mod,sg,sd_mod,aic7xxx,scsi_transport_spi,libata
thermal 20872 0
processor 40876 1 thermal
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hate to be a Me-Too'er, but this looks incredibly like what's happening on my system. Also openSUSE 10.3 with all current updates. If you let me know what you need, I'll be glad to paste some logs. I will have to reinstall the driver again, but if you see the other messages I've posted, I've already done a bit of troubleshooting to no avail.
~Jon
Here is my dmesg:
Linux version 2.6.22.17-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fe40000 (usable)
BIOS-e820: 000000003fe40000 - 000000003fe50000 (ACPI data)
BIOS-e820: 000000003fe50000 - 000000003ff00000 (ACPI NVS)
126MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 261696) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 261696
early_node_map[1] active PFN ranges
0: 0 -> 261696
On node 0 totalpages: 261696
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 252 pages used for memmap
HighMem zone: 32068 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F7300, 0014 (r0 ACPIAM)
ACPI: RSDT 3FE40000, 0030 (r1 INTEL D845GBV 20030714 MSFT 97)
ACPI: FACP 3FE40200, 0081 (r2 INTEL D845GBV 20030714 MSFT 97)
ACPI: DSDT 3FE40370, 3FD7 (r1 INTEL D845GBV 10A MSFT 100000D)
ACPI: FACS 3FE50000, 0040
ACPI: APIC 3FE40300, 0068 (r1 INTEL D845GBV 20030714 MSFT 97)
ACPI: ASF! 3FE44350, 0084 (r16 AMIASF I845GASF 1 MSFT 100000D)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3ff00000:c0100000)
Built 1 zonelists. Total pages: 259652
Kernel command line: root=/dev/disk/by-id/scsi-SATA_IC35L060AVV207-_VNVB20G2GMVG5R-part3 vga=0x317 resume=/dev/sda2 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2400.175 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1029456k/1046784k available (1829k kernel code, 16512k reserved, 764k data, 228k init, 129280k highmem)
virtual kernel memory layout:
fixmap : 0xffdf4000 - 0xfffff000 (2092 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0390000 - 0xc03c9000 ( 228 kB)
.data : 0xc02c95cb - 0xc0388964 ( 764 kB)
.text : 0xc0100000 - 0xc02c95cb (1829 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4804.51 BogoMIPS (lpj=9609036)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Unpacking initramfs... done
Freeing initrd memory: 4045k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 592 Objects with 46 Devices 164 Methods 21 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
CPU0: Intel(R) Pentium(R) 4 Family CPU 2.40GHz stepping 04
Total of 1 processors activated (4804.51 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:............................................................................................................
Initialized 18/21 Regions 29/29 Fields 47/47 Buffers 14/14 Packages (601 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.
Executed 1 _INI methods requiring 0 _STA executions (examined 50 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: RTC can wake from S4
pnp: 00:09: ioport range 0x400-0x47f has been reserved
pnp: 00:09: ioport range 0x680-0x6ff has been reserved
pnp: 00:09: ioport range 0x480-0x4bf has been reserved
pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:0a: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0a: iomem range 0xc0000-0xdffff could not be reserved
pnp: 00:0a: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0a: iomem range 0x100000-0x3fefffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: f8900000-fe9fffff
PREFETCH window: e0700000-e07fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1205683425.392:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Switched to NOHz mode on CPU #0
floppy0: no floppy controllers found
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 228k freed
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126]
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.11
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
ata1.00: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
ata1.00: 78165360 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2.00: ATA-6: WDC WD2000JB-00DUA0, 63.13F63, max UDMA/100
ata2.00: 390721968 sectors, multi 16: LBA48
ata2.01: ATA-5: MAXTOR 6L080J4, A93.0500, max UDMA/133
ata2.01: 156355584 sectors, multi 16: LBA
ata2.00: configured for UDMA/100
ata2.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA WDC WD2000JB-00D 63.1 PQ: 0 ANSI: 5
scsi 1:0:1:0: Direct-Access ATA MAXTOR 6L080J4 A93. PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000e800
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e880
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000ec00
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 1:0:1:0: [sdc] 156355584 512-byte hardware sectors (80054 MB)
sd 1:0:1:0: [sdc] Write Protect is off
sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:1:0: [sdc] 156355584 512-byte hardware sectors (80054 MB)
sd 1:0:1:0: [sdc] Write Protect is off
sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc:<6>usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sdc1
sd 1:0:1:0: [sdc] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfeb7fc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: new device found, idVendor=04cc, idProduct=1122
usb 3-1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-1: configuration #1 chosen from 1 choice
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 5 ports detected
usb 3-1.1: new full speed USB device using uhci_hcd and address 3
usb 3-1.1: new device found, idVendor=05ac, idProduct=1002
usb 3-1.1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.1: Product: Hub in Apple Extended USB Keyboard
usb 3-1.1: Manufacturer: Mitsumi Electric
usb 3-1.1: configuration #1 chosen from 1 choice
hub 3-1.1:1.0: USB hub found
hub 3-1.1:1.0: 3 ports detected
usb 3-1.2: new low speed USB device using uhci_hcd and address 4
usb 3-1.2: new device found, idVendor=045e, idProduct=0040
usb 3-1.2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.2: Product: Microsoft Wheel Mouse Optical�
usb 3-1.2: Manufacturer: Microsoft
usb 3-1.2: configuration #1 chosen from 1 choice
usb 3-1.5: new full speed USB device using uhci_hcd and address 5
usb 3-1.5: new device found, idVendor=0403, idProduct=8401
usb 3-1.5: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.5: Product: PS/2 Keyboard And Mouse I/F
usb 3-1.5: Manufacturer: FTDI
usb 3-1.5: configuration #1 chosen from 1 choice
usb 3-1.1.1: new full speed USB device using uhci_hcd and address 6
usb 3-1.1.1: new device found, idVendor=05ac, idProduct=0204
usb 3-1.1.1: new device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-1.1.1: Product: Apple Extended USB Keyboard
usb 3-1.1.1: Manufacturer: Mitsumi Electric
usb 3-1.1.1: configuration #1 chosen from 1 choice
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:1:0: Attached scsi generic sg2 type 0
usbcore: registered new interface driver hiddev
input: Microsoft Microsoft Wheel Mouse Optical� as /class/input/input1
input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical�] on usb-0000:00:1d.2-1.2
input: FTDI PS/2 Keyboard And Mouse I/F as /class/input/input2
input: USB HID v1.00 Keyboard [FTDI PS/2 Keyboard And Mouse I/F] on usb-0000:00:1d.2-1.5
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 830M Chipset.
agpgart: Detected 892K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
you are certain that your <4>intel_rng: system has a functional
RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
iTCO_vendor_support: vendor-support=0
i810_smbus 0000:00:02.0: i810/i815 i2c device found.
I810/I815 I2C Adapter: SDA stuck high!
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:02 failed with error -16
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Linux video capture interface: v2.00
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
cx2388x alsa driver version 0.0.6 loaded
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
intel8x0_measure_ac97_clock: measured 54929 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:01:00.1[A] -> GSI 21 (level, low) -> IRQ 21
cx88[0]: subsystem: 11bd:0051, board: Pinnacle PCTV HD 800i [card=58,autodetected]
cx88[0]: TV tuner type 76, Radio tuner type -1
cx88[0]: Test OK
tuner' 1-0064: chip found @ 0xc8 (cx88[0])
xc5000: Successfully identified at address 0x64
xc5000: Firmware has not been loaded previously
xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)...
xc5000: firmware read 12332 bytes.
xc5000: firmware upload
cx88[0]: Calling XC5000 callback
input: FTDI PS/2 Keyboard And Mouse I/F as /class/input/input5
input: USB HID v1.00 Mouse [FTDI PS/2 Keyboard And Mouse I/F] on usb-0000:00:1d.2-1.5
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input6
input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.2-1.1.1
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input7
input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.2-1.1.1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
input: cx88 IR (Pinnacle PCTV HD 800i) as /class/input/input8
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 22
e100: eth0: e100_probe: addr 0xfe9ff000, irq 22, MAC addr 00:07:E9:AD:BB:07
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:01:00.2[A] -> GSI 21 (level, low) -> IRQ 21
cx88[0]/2: found at 0000:01:00.2, rev: 5, irq: 21, latency: 32, mmio: 0xfd000000
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 21
cx88[0]/0: found at 0000:01:00.0, rev: 5, irq: 21, latency: 32, mmio: 0xfb000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 11bd:0051, board: Pinnacle PCTV HD 800i [card=58]
cx88[0]/2: cx2388x based DVB/ATSC card
xc5000: Successfully identified at address 0x64
xc5000: Firmware has been loaded previously
DVB: registering new adapter (cx88[0])
DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
Adding 1574360k swap on /dev/sda2. Priority:-1 extents:1 across:1574360k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sda4
Ending clean XFS mount for filesystem: sda4
XFS mounting filesystem sdb1
Ending clean XFS mount for filesystem: sdb1
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
powernow: This module only works with AMD K7 CPUs
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[drm] Initialized i915 1.6.0 20060119 on minor 0
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
IA-32 Microcode Update Driver: v1.14a <tigran@xxxxxxxxxxxxxxxxxxxx>
usb 3-1.5: reset full speed USB device using uhci_hcd and address 5
usb 3-1.5: reset full speed USB device using uhci_hcd and address 5
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
01:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
01:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
01:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
01:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (LOM) Ethernet Controller (rev 81)
and my lspci:
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
