| I just tested the card on Windows Vista and it works. Altough I'm only getting a limited ammount of channels but had the same problem with my other card so that's probably not card related. (My TV decoder gets all channels)
Timothy. On 17 Mar 2008, at 08:01, joris abadie wrote: Since your post, I try with feisty and gutsy, the nova-S PCI and it is the same, no problem. Maybe your card is broken or something with your PC. Can you give me dmesg ?
2008/3/17, Timothy Parez <timothyparez@xxxxxxxxx>: Hi,
I put the card in a new computer and installed Ubuntu Hardy, the latest preview. The adapter is recognized so I installed dvb-utils.
Then I executed scan /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-28.2E
The result was the same
WARNING >>> tuning failed!
Timothy.
On 16 Mar 2008, at 20:33, joris abadie wrote: Bonjour,
j'ai quatre satellites sur nova-S ( Astra 19°, hotbird ... ) et tout s'est installé tout seul.
Every thing is OK with HARDY no install to do ; me-tv or kaffeine have the chanels very good
2008/3/15, Timothy Parez <timothyparez@xxxxxxxxx>: -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
The output of lspci -vvv on my computer looks like this:
04:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e5000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [Audio Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [MPEG Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e7000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:00.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [IR Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 7
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
I installed v4l and now have a /dev/dvb/adapter0 directory
demux0 dvr0 frontend0 net0
I should note that the items in that directory are colored yellow with
black background (perhaps this is indicating something related to the
problem?
When I use scan I get this
scan -a 0 /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12551500 V 22000000 5
>>> tune to: 12551:v:0:22000
WARNING: >>> tuning failed!!!
>>> tune to: 12551:v:0:22000 (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
If I connect the cable to a decoder + tv I get all the channels and
perfect image.
I'm using a dual / twin LNB. Dual for Astra 19.2 E and 23.5 E with 2
connectors.
I did get it to work on my previous computer.
Any ideas?
Timothy.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (Darwin)
iD8DBQFH3FDS+j5y+etesF8RAldeAKDeRHdC3YqDZNBze975O5peeRjILgCeNQqV
CukiOWQomn8Ctkn2ErrQMI4=
=QbCX
-----END PGP SIGNATURE-----
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
|
