Hi,
I put the card in a new computer and installed Ubuntu Hardy, the latest preview. The adapter is recognized so I installed dvb-utils.
Then I executed scan /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-28.2E
The result was the same
WARNING >>> tuning failed!
Timothy.
On 16 Mar 2008, at 20:33, joris abadie wrote: Bonjour,
j'ai quatre satellites sur nova-S ( Astra 19°, hotbird ... ) et tout s'est installé tout seul.
Every thing is OK with HARDY no install to do ; me-tv or kaffeine have the chanels very good
2008/3/15, Timothy Parez <timothyparez@xxxxxxxxx>: -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
The output of lspci -vvv on my computer looks like this:
04:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e5000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [Audio Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [MPEG Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e7000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:00.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [IR Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 7
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
I installed v4l and now have a /dev/dvb/adapter0 directory
demux0 dvr0 frontend0 net0
I should note that the items in that directory are colored yellow with
black background (perhaps this is indicating something related to the
problem?
When I use scan I get this
scan -a 0 /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12551500 V 22000000 5
>>> tune to: 12551:v:0:22000
WARNING: >>> tuning failed!!!
>>> tune to: 12551:v:0:22000 (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
If I connect the cable to a decoder + tv I get all the channels and
perfect image.
I'm using a dual / twin LNB. Dual for Astra 19.2 E and 23.5 E with 2
connectors.
I did get it to work on my previous computer.
Any ideas?
Timothy.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (Darwin)
iD8DBQFH3FDS+j5y+etesF8RAldeAKDeRHdC3YqDZNBze975O5peeRjILgCeNQqV
CukiOWQomn8Ctkn2ErrQMI4=
=QbCX
-----END PGP SIGNATURE-----
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
|
