Hi, i'm trying to get a AOPEN mc770a up and running. >From what i can find it should be the same as a DIBCOM 7700-PH. This should contain dib7700 + ConexantCX25842 + Xceive XC3028 according to their own docs. After following this thread with some minor alterations to match my card's usbid parameters. http://thread.gmane.org/gmane.linux.drivers.dvb/39269/focus=39298 I've manged to get the card detected and it loads the driver accordings to dmesg log. (will post a full log later, currently that machine isn't running). No errors show up untill i try to tune, then i get this logged in log. dib0700: stk7700ph_xc3028_callback: XC2028_TUNER_RESET 0 xc2028 1-0061: i2c output error: rc = -5 (should be 64) xc2028 1-0061: -5 returned from send xc2028 1-0061: Error -22 while loading base firmware I traced it down to where it tries to write to the i2c address 0x61 which was setup for the XC3028. Is there any posibility that this address should be something else? If anybody has some experience with this types of card and can give me hand, let me know. Regards Joakim _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
