scan fails to detect pid's for streams

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

I run a system with a Nova-T-500 card, ubuntu server (gutsy).

scan picks up the cannels and outputs a tzap format file.

When I try to zap to a channel I get a lock, but no data is available
on /dev/dvb/adapter0/dvr0

Here is the output from tzap:

$ tzap -r nrk2
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 722000000 Hz
video pid 0x0000, audio pid 0x0000
status 0f | signal 913f | snr 0000 | ber 001fffff | unc 00000025 |
status 1f | signal 913c | snr 0000 | ber 00000000 | unc 00000006 | FE_HAS_LOCK

As you can see it tunes to pid 0 for both audio and video

Here is the channel data from the channel.conf file:

NRK2:722000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:0:102

This is the output written by scan for this channel:

0x0000 0x0066: pmt_pid 0x010d NTV -- NRK2 (running)

Please advice

GIH

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux