anybody?? please.. Frühwald Szabolcs írta: > hi there, > > i've a leadtek tv2000xp global pci card > it's running OK (with some errors, but works) with current developement > v4l-dvb branch > i tried to enable it's IR remote control too in cx88-input.c > just copied tv2000xp expert switch entry: > > case CX88_BOARD_WINFAST2000XP_EXPERT: > ir_codes = ir_codes_winfast; > ir->gpio_addr = MO_GP0_IO; > ir->mask_keycode = 0x8f8; > ir->mask_keyup = 0x100; > ir->polling = 1; /* ms */ > break; > > but the result of this was: IR recognized well by kernel, dev/input > device attached > but when i pressed a button on remote, it printed its character, waited > a sec and started to repeat this character forever > so, i pressed '6', out was: > 6<1sec_delay>666666666666666666666666666666666666666666666666666 .... etc.. > could anybody help me to correct this? > it would be cool if i could paste a patch to the mailing list to enable > this functionality for this card > i figured out the main problem is with "ir->mask_keyup=0x100", so maybe > it isn't there... but i didnt find it at 0x60,0x80 too and don't know > where could it be?? > > ps: I also tried to comment out this line of code (as i saw some other > entrys without this option), the repeats are stopped but when i pressed > a button more than once it's only showed up once. So, i pressed 6, > printed 6 but when i pressed 6 again, it didnt print anything. After i > pressed other button (printed once too), and pressed again 6, prints 6 > again). > > Thanks for your help... > > bye, > Szab > > > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
