Manu, The Diseqc switch has been removed and now all polarities tune, and DVB-S2 works as well. Thanks! Tim. On 24 Feb 2008, at 00:38, Manu Abraham wrote: > Tim Hewett wrote: >> Manu, >> Thanks, it now tunes to horizontal transponders though not vertical >> ones. I think others have been having similar symptoms with the >> mantis/multiproto trees. > > Can someone replicate this behaviour: not tuning to vertical > transponders ? > Do you have any switches or a rotor in the SEC chain ? > >> It won't tune to any DVB-S2 transponder, but that has not changed >> since previously. > > > Hmm .. Are you really sure ? > > >> Messages in dmesg for successful tuning: >> [ 402.455361] dvb_frontend_ioctl: DVBFE_GET_INFO >> [ 402.455366] stb0899_get_info: Querying DVB-S info >> [ 402.556373] newfec_to_oldfec: Unsupported FEC 9 >> [ 402.556377] dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 >> [ 402.556998] mantis start feed & dma >> [ 402.557255] stb0899_search: set DVB-S params >> [ 402.567810] stb6100_set_bandwidth: Bandwidth=51610000 >> [ 402.569927] stb6100_get_bandwidth: Bandwidth=52000000 >> [ 402.581331] stb6100_get_bandwidth: Bandwidth=52000000 >> [ 402.613394] stb6100_set_frequency: Frequency=1023000 >> [ 402.615510] stb6100_get_frequency: Frequency=1022994 >> [ 402.621496] stb6100_get_bandwidth: Bandwidth=52000000 >> [ 404.541047] _stb0899_read_reg: Read error, Reg=[0xf525], >> Status=-121 >> [ 404.541749] mantis stop feed and dma > > I will need the stb0899 and stb6100 modules to be loaded with > verbose=5 > parameter, for understanding what's happening. > > > Regards, > Manu > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
