Gernot, I have now tried the mantis tree. It also needed the MANTIS_VP_1041_DVB_S2 #define to be changed to 0x0001 for this card, but after doing that it was recognised: [ 56.586237] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 56.586330] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
[ 56.586556] irq: 16, latency: 32
[ 56.586557] memory: 0xe5100000, mmio: 0xffffc200000f8000
[ 56.586708] found a VP-1041 PCI DSS/DVB-S/DVB-S2 device on (01:06.0),
[ 56.586791] Mantis Rev 1 [1ae4:0001], irq: 16, latency: 32
[ 56.586847] memory: 0xe5100000, mmio: 0xffffc200000f8000
[ 56.589867] MAC Address=[00:08:c9:e0:26:92]
[ 56.589972] mantis_alloc_buffers (0): DMA=0x1aa10000 cpu=0xffff81001aa10000 size=65536
[ 56.590081] mantis_alloc_buffers (0): RISC=0x1b7f0000 cpu=0xffff81001b7f0000 size=1000
[ 56.590187] DVB: registering new adapter (Mantis dvb adapter)
[ 57.106676] stb0899_write_regs [0xf1b6]: 02
[ 57.107730] stb0899_write_regs [0xf1c2]: 00
[ 57.108781] stb0899_write_regs [0xf1c3]: 00
[ 57.110884] _stb0899_read_reg: Reg=[0xf000], data=""
[ 57.110964] stb0899_get_dev_id: ID reg=[0x82]
[ 57.111040] stb0899_get_dev_id: Device ID=[8], Release=[2]
[ 57.117425] _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Data=""
[ 57.123732] _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Data=""
[ 57.123735] stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1]
[ 57.130121] _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Data=""
[ 57.136428] _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Data=""
[ 57.136430] stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1]
[ 57.136509] stb0899_attach: Attaching STB0899
[ 57.136586] mantis_frontend_init (0): found STB0899 DVB-S/DVB-S2 frontend @0x68
[ 57.136690] stb6100_attach: Attaching STB6100
[ 57.137118] DVB: registering frontend 1 (STB0899 Multistandard)...
However it still doesn't tune. e.g.: root@kubuntu7:~/linuxtv-dvb-apps-1.1.1/util/szap# ./szap -r -p -l UNIVERSAL -t 0 -a 1 BBC1West
reading channels from file '/root/.szap/channels.conf'
zapping to 1 'BBC1West':
sat 0, frequency = 10818 MHz V, symbolrate 22000000, vpid = 0x0901, apid = 0x0904 sid = 0x0002
Querying info .. Delivery system=DVB-S
using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'
----------------------------------> Using 'STB0899 DVB-S' DVB-S
do_tune: API version=3, delivery system = 0
do_tune: Frequency = 1068000, Srate = 22000000
do_tune: Frequency = 1068000, Srate = 22000000
Whereas this is the result when using an ordinary Skystar 2 card (which works fine): root@kubuntu7:~/linuxtv-dvb-apps-1.1.1/util/szap# ./szap -r -p -l UNIVERSAL -t 0 -a 0 BBC1West
reading channels from file '/root/.szap/channels.conf'
zapping to 1 'BBC1West':
sat 0, frequency = 10818 MHz V, symbolrate 22000000, vpid = 0x0901, apid = 0x0904 sid = 0x0002
Querying info .. Delivery system=DVB-S
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
----------------------------------> Using 'ST STV0299 DVB-S' DVB-S
do_tune: API version=3, delivery system = 0
do_tune: Frequency = 1068000, Srate = 22000000
do_tune: Frequency = 1068000, Srate = 22000000
couldn't find pmt-pid for sid 0002
status 1f | signal cac8 | snr cb6d | ber 000061d0 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c9f0 | snr d15e | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal ca1d | snr d176 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
Using szap on the Skystar HD2 caused lots of logs to dmesg: [ 97.691029] stb0899_search: set DVB-S params
[ 97.691112] stb0899_search: delivery system=1
[ 97.691188] stb0899_search: Frequency=1068000, Srate=22000000
[ 97.691269] stb0899_search: Parameters IN RANGE
[ 97.692611] _stb0899_read_reg: Reg=[0xf1c2], data=""
[ 97.694085] _stb0899_read_reg: Reg=[0xf1c3], data=""
[ 97.694166] stb0899_set_delsys: Delivery System -- DVB-S
[ 97.695848] _stb0899_read_reg: Reg=[0xf533], data=""
[ 97.695929] stb0899_write_regs [0xf533]: 09
[ 97.697420] stb0899_write_regs [0xf548]: b1
[ 97.698913] stb0899_write_regs [0xf549]: 40
[ 97.700410] stb0899_write_regs [0xf54a]: 42
[ 97.701778] stb0899_write_regs [0xf54b]: 12
[ 97.704225] _stb0899_read_reg: Reg=[0xff11], data=""
[ 97.704308] stb0899_write_regs [0xff11]: 80
[ 97.705797] stb0899_write_regs [0xf1c2]: 78 07
[ 97.707631] stb0899_set_mclk: state->config=ffffffff882654a0
[ 97.707713] stb0899_set_mclk: mdiv=21
[ 97.707788] stb0899_write_regs [0xf1b3]: 15
[ 97.710338] _stb0899_read_reg: Reg=[0xf1b3], data=""
[ 97.710427] stb0899_get_mclk: div=21, mclk=99000000
[ 97.710505] stb0899_set_mclk: MasterCLOCK=99000000
[ 97.710582] stb0899_search: DVB-S delivery system
[ 97.712051] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.712131] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
[ 97.712211] stb0899_write_regs [0xf12a]: dc
[ 97.715358] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.717042] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.717121] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
[ 97.717202] stb0899_write_regs [0xf12a]: dc
[ 97.720769] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.726992] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.727071] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
[ 97.727150] stb0899_write_regs [0xf12a]: dc
[ 97.730951] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.731030] stb6100_set_bandwidth: Bandwidth=51610000
[ 97.732640] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.732719] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
[ 97.732800] stb0899_write_regs [0xf12a]: dc
[ 97.740229] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.740309] stb6100_get_bandwidth: Bandwidth=52000000
[ 97.740311] stb0899_write_regs [0xf157]: 11
[ 97.741801] stb0899_search: running DVB-S search algo ..
[ 97.741898] stb0899_set_srate: -->
[ 97.741973] stb0899_write_regs [0xf446]: 38 e3 90
[ 97.744156] stb0899_write_regs [0xf41c]: 89
[ 97.746593] _stb0899_read_reg: Reg=[0xf41d], data=""
[ 97.746672] stb0899_write_regs [0xf41d]: a7
[ 97.748164] stb0899_dvbs_algo: Set the timing loop to acquisition
[ 97.748262] stb0899_write_regs [0xf417]: 46
[ 97.749648] stb0899_write_regs [0xf41b]: ee
[ 97.750809] stb0899_dvbs_algo: Derot Percent=30 Srate=22000000 mclk=1647
[ 97.750893] stb0899_dvbs_algo: RESET stream merger
[ 97.752023] _stb0899_read_reg: Reg=[0xff11], data=""
[ 97.752103] stb0899_write_regs [0xff11]: c0
[ 97.754207] _stb0899_read_reg: Reg=[0xf583], data=""
[ 97.754286] stb0899_write_regs [0xf583]: 3c
[ 97.755338] stb0899_write_regs [0xf41e]: 01
[ 97.756392] stb0899_write_regs [0xf53d]: 19
[ 97.758498] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.758577] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
[ 97.758656] stb0899_write_regs [0xf12a]: dc
[ 97.764979] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.765058] stb6100_get_bandwidth: Bandwidth=52000000
[ 97.765060] stb0899_write_regs [0xf43e]: 00 00
[ 97.766462] stb0899_write_regs [0xf439]: 00
[ 97.768568] _stb0899_read_reg: Reg=[0xf41b], data=""
[ 97.768646] stb0899_write_regs [0xf41b]: ee
[ 97.769700] stb0899_dvbs_algo: Tuner set frequency
[ 97.770830] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.770909] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
[ 97.770989] stb0899_write_regs [0xf12a]: dc
[ 97.777313] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.777392] stb0899_get_params: Get DVB-S params
[ 97.778522] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.778601] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
[ 97.778680] stb0899_write_regs [0xf12a]: dc
[ 97.784985] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.786116] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.786195] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
[ 97.786274] stb0899_write_regs [0xf12a]: dc
[ 97.789079] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.790210] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.790300] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
[ 97.790380] stb0899_write_regs [0xf12a]: dc
[ 97.793185] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.802463] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.802544] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
[ 97.802623] stb0899_write_regs [0xf12a]: dc
[ 97.805428] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.806559] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.806637] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
[ 97.806716] stb0899_write_regs [0xf12a]: dc
[ 97.809521] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.845351] stb6100_set_frequency: Frequency=1068000
[ 97.846406] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.846484] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
[ 97.846563] stb0899_write_regs [0xf12a]: dc
[ 97.852886] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.852965] stb6100_get_frequency: Frequency=1068002
[ 97.857361] stb0899_dvbs_algo: current derot freq=0
[ 97.858492] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.858574] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
[ 97.858653] stb0899_write_regs [0xf12a]: dc
[ 97.864975] _stb0899_read_reg: Reg=[0xf12a], data=""
[ 97.865054] stb6100_get_bandwidth: Bandwidth=52000000
[ 97.869318] stb0899_write_regs [0xf439]: f2
[ 97.871424] _stb0899_read_reg: Reg=[0xf438], data=""
[ 97.872554] _stb0899_read_reg: Reg=[0xf439], data=""
[ 97.872633] stb0899_check_tmg: ------->TIMING OK !
[ 97.874113] stb0899_read_regs [0xf43e]: fd 6d
[ 97.874117] stb0899_search_tmg: ------->TIMING OK ! Derot Freq = -659
[ 97.874199] stb0899_dvbs_algo: TIMING OK ! Derot freq=-659, mclk=1647
[ 97.875335] _stb0899_read_reg: Reg=[0xf41b], data=""
[ 97.875413] stb0899_write_regs [0xf41b]: ee
[ 97.876467] stb0899_search_carrier: Derot Freq=-659, mclk=1647
[ 97.882354] _stb0899_read_reg: Reg=[0xf41b], data="">
Those logs don't look too bad superficially, but it's still not working. Tim. hy, the wiki is not up2date. Twinhan VP-1041 support is now in the mantis tree (inkl. multiproto) hg clone http://jusst.de/hg/mantis but for me, the old initialization parameters works much better. with the new ones i get only a destructed picture (unwatchable). gernot |
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
