> > It is not that simple. Steven patch works for DTV on PCI Nano; Christopher> > patches for some other DiVCO boards (DTV also); my port of Markus patch> for> > other boards (tested by Dâniel Fraga - Analog TV).> > > > What does one board have to do with another? Just because these boards > all use xceive tuners does not mean that they should be grouped together. No, but we have patches for all of them. > Because the user has the ability to load cx8800 without cx88-dvb, and > likewise, the user has the ability to load cx88-dvb without cx8800, the > attach call must be fully qualified such that the other side of the > driver is not required to be loaded in order for the tuner to work. If you take a look at the code, you'll see that all code is at cx88xx. Thismodule is loaded by cx8800, if you're using analog, or by cx8802, if you'reusing cx88-dvb or cx88-blackbird. The code initializes xc3028 before tuner attach. > In the case of FusionHDTV5 pci nano, there will never be an attach call > from the analog side of the driver, since the tuner is hidden behind the > s5h1409's i2c gate, and analog mode is not supported with the current > driver. If you set i2c_scan=1 on the PCI nano, the xceive tuner will > not even show up in the scan. The proper fix is to open the i2c gate before loading tuner. This will allowi2c_scan to work and both analog and digital modes will work. Btw, thissomewhat similar to what dvico_fusionhdtv_hybrid_init() does on cx88-cards. I've added a patch that should open the bridge for s5h1409. Please test. > > We need one solution that works for all boards, not just yours.> >> > That's said, maybe SET_TUNER_CONFIG is being called too early. Maybe the> way to> > fix this is to create an special function to initialize it, that would be> > called later by cx8800 or cx8802.> both cx8800 *and* cx8802 need this functionality. Please keep in mind > that some users do not ever use analog mode of these cards, and some > have even blacklisted cx8800 from loading. This is fine, because cx8800 > is not needed for cx88-dvb to function properly. This is a level of > flexibility that we do not want to remove.> > The _real_ problem is that the tuner is being attached to the bridge > driver in two locations -- analog side and digital side. This problem > will be entirely avoided once we are attaching the tuner driver in a > single location, globally to the entire driver. Such changes are > planned to be dealt with in tuner refactor phase 4, but I am still > dealing with refactoring the prerequisites for this scenario, in phase 3 > -- all will come in due time, but for now, we must provide a fully > qualified attachment call each time we attach a tuner driver. It would be really nice to avoid having to attach it later, on cx88-dvb,although the double attach won't hurt. I'm not sure on how you want to avoidthis. Cheers,Mauro _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
