On Tue, 19 Feb 2008 13:38:45 -0300 Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx> wrote: > I've did some changesets fixing both drivers at: > http://linuxtv.org/hg/~mchehab/cx88-xc2028/ > Dâniel Fraga, > > Please test if the gpio's from Daniel Gimpelvinch works for you, against the > newer tree. I suspect it will work. However, is it not uncommon to have two > cards with the same brand name, but needing different gpio settings. Some good news Mauro: cx88[0]: subsystem: 14f1:ea3d, board: PowerColor Real Angel 330 [card=62,autodetected] cx88[0]: TV tuner type 71, Radio tuner type 0 tuner' 0-0061: chip found @ 0xc2 (cx88[0]) xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner xc2028 0-0061: xc2028/3028 firmware name not set! cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw cx88[0]/0: found at 0000:01:08.0, rev: 5, irq: 18, latency: 32, mmio: 0xfc000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback Notice that it's loading the firmware correctly now ;). I tried xawtv and gqradio (and radio from xawtv too). I hear just white noise. I tried to change the gpios, but without success... Maybe Daniel Gimpelevich could try on his Powercolor to confirm this.... I think we're almost there... cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000100000007. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000100000007. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE FM (401), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=FM (400), id 0000000000000000. xc2028 0-0061: Loading SCODE for type=SCODE HAS_IF_3280 (60000000), id 0000000000000000. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=BASE FM (401), id 0000000000000000. cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Loading firmware for type=FM (400), id 0000000000000000. xc2028 0-0061: Loading SCODE for type=SCODE HAS_IF_3280 (60000000), id 0000000000000000. xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7 cx88[0]: Calling XC2028/3028 callback -- _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
